Inconel 600 Sheet Plate Manufacturer

Inconel 625 Plate

Steel Plate
Sizes in Stock
Alloy 625 Sheet: Thickness: 0.1 to 5.0 mm
WNR 2.4856 Plate:
Thickness: 2.5 to 100 mm
European & American Standard: ASTM B443, ASME SB 443, UNS N06625, WNR 2.4856, , AMS 5599, ISO 6208, AMS 5869, BS 3072NA21, VdTüV 499, DIN 17750, EN 10095
UNS N06625 Material Forms:
Sheet, Plate, Coil, Strip, Foil, Shim Sheet
cutting method
Cutting Method: Water Jet Cutting
brand
Brand:
Jindal, ATI, Yakin, Special Metals, Outokumpu, VDM, Huntington, ATI, DKC,
Origin
Origin: USA, Japanese, Indian, European, Korean
Welding Electrodes :
INCONEL 112
Fillers :
INCONEL filler metal 625, INCOLOY 82
ASTM A265 Nickel 625 Clad Plate Use :
Pressure Vessels Applications
Delivery Time:
Indonesia : 6-8 Days
Nigeria: 17-19 Days
Israel: 7-8 Days
MTC Certificate: EN 10204 3.1 and 3.2

Supplier of nickel alloy 625 sheet in grades 1 and 2 at lowest price

Inconel 625 Plate


Stockist of custom-sized ASTM B443 UNS N06625 strips in Mumbai with thicknesses between 0.05 and 3 mm and widths between 5 and 200 mm

Inconel 625 Plate Specification

Nickel Alloy 625 Sheet Sizes

Nickel Alloy 625 Sheet

  • Thickness: 0.1 to 5.0 mm
  • Width:0.5 to 1.0 meter
  • Length: 0.7 to 6.0 meter
WNR 2.4856 Plate Sizes

WNR 2.4856 Plate

  • Thickness: 2.5 to 100 mm
  • Width:0.05 to 2.0 meter
  • Length: 0.1 to 6.0 meter
AMS 5599 Coils Sizes

AMS 5599 Coils

  • Thickness: 0.1 to 5.0 mm
  • Width:0.5 to 1.2 meter
  • Edge: Square, Round, Rolled, Slit
Inconel 625LCF Strips Sizes

Inconel 625LCF Strips

  • Thickness:0.05 to 3mm
  • Width:5 to 200 mm
  • Packaging: Bubble wraps, Wooden Pallets etc.
Are You Looking For ?

Are You Looking For ?

  • Trade name:Alloy 625, Nickel 625, Chornin 625
  • AMS 5599, AMS 5869
  • Processsing: Deburring, Edging, Grinding etc.
  • Welding:PLASMA, GMAW, SAW, GTAW
Global Standards

Global Standards

  • ASTM B443 | ASME SB 443
  • UNS: N06625
  • WNR: 2.4856
  • Other: VdTüV 499, ISO 6208, BS 3072NA21
Regarding Inconel 625 Plate

Regarding Inconel 625 Plate

  • Density: 8.44 g/cm³
  • Melting Point: 1290-1350°C
  • Temprature Range: 2000 F - 1093 C
  • Life Span: 50 years
  • Finish:Mirror Finish, BA Finish, 2B Finish, No. 4 Finish
Beneficial Data

Beneficial Data

  • Form: Hot Rolled, Cold Rolled, Perforated, chequered
  • Hardness: Quarter, Soft, Hard and Half Hard etc.
  • Technique: Cold and Hot Rolled, Forged etc.
  • Process: Laser, Waterjet, Plasma, Oxy-propane etc.
  • Surface:Sandblasted, Mirror, Brushed, Glossy etc.
 UNS N06625 plate   delivery time

UNS N06625 plate delivery time

  • Generally it is 7-10 days if its in stock
  • Oman/ Qatar/ Saudi Arabia – 3-5 days (by Air / Ship)
  • 15-20 days if its not in stock
DIN 2.4856   surface finish classes

DIN 2.4856 surface finish classes

  • Class A : finest finish
  • Class B: slightly less fine finish
  • Class C : most basic finish
 Nickel Alloy 625 sheet features

Nickel Alloy 625 sheet features

  • Outstanding heat resistance
  • Strength
  • Weldability
  • Metallurgical stability
  • Corrosion resistance
Werkstoff 2.4856 coil  marking

Werkstoff 2.4856 coil marking

  • Origin of material
  • Material grade / size
  • Manufacturer logo / name
  • ASTM/ ASME standard
  • Manufacturing date
AMS 5599 plate   common trade names

AMS 5599 plate common trade names

  • 625 Alloy
  • CarTech Pyromet® Alloy 625
  • Nickel 625
  • Nickelvac 625
  • ISO NW6625
  • Haynes 625
  • W-No 2.4856
  • Inconel 625
Inconel 625LCF strip processing

Inconel 625LCF strip processing

  • Grinding
  • Leveling
  • Edging
  • Deburring
  • Precision Rerolling
  • Trepanning
  • Boring
  • Heat Treating
AMS 5869  cold rolled plate method of cutting

AMS 5869 cold rolled plate method of cutting

  • Oxy-propane flame cutting
  • Plasma cutting
  • Laser cutting
  • Waterjet cutting
ASME SB 443 Gr 1  annealed plate documentation offered

ASME SB 443 Gr 1 annealed plate documentation offered

  • Bill of Lading.
  • Copy of Invoice
  • Country of Origin Certificate (Original)
  • Copy of Packing List indicating all details
Supply   Alloy 625 sheet in following brand

Supply Alloy 625 sheet in following brand

  • Columbus Stainless
  • HAYNES International
  • Valbruna Stainless Steel
  • Nippon Yakin
  • ATI , VDM
  • Outokumpu
  • Special Metals(SMC)
  DIN 2.4856  other industry standards

DIN 2.4856 other industry standards

  • PWA LCS
  • EMS95377
  • DFARS Compliant
  • GE Aircraft Engine (GT193)
  • EN 10204
  • GE Aviation S-SPEC-35 AeDMS S-400
  • EN 2.4856
  • RR SABRe Edition 2
 Inconel 2.4856  strip   value added services

Inconel 2.4856 strip value added services

  • Mechanical processing
  • Edge preparation
  • Welding , Polishing
  • Blanking , Sawing
 Alloy 625  plate ASTM standard

Alloy 625 plate ASTM standard

  • ASTM B424 UNS N08825
  • ASTM B463 UNS N08020
  • ASTM B168 UNS N06600
  • ASTM B575 UNS N10276
  • ASTM B127 UNS N04400
UNS 6625 sheet characteristics

UNS 6625 sheet characteristics

  • High corrosion-fatigue strength
  • Pitting and crevice cor- rosion
  • High creep strength
  • High tensile strength
  • Excellent weldability
Certification of   AMS 5599 sheet

Certification of AMS 5599 sheet

  • Certificate of Origin legalized
  • 100% Radiography Test Report
  • EN 10204/3.1B
  • Third Party Inspection Report
  • Raw Materials Certificate
  WNR. 2.4856  cold rolled plate finish

WNR. 2.4856 cold rolled plate finish

  • Electroless nickel plating
  • Sandblasted
  • Glossy
  • Brushed
  • Mirror
DIN 2.4856 hot rolled plate welding method

DIN 2.4856 plate welding method

  • GTAW (TIG)
  • PLASMA
  • GMAW (MIG/MAG)
  • SMAW (MMA)
  • SAW


Inconel 625 Sheet Plate is manufactured and exported by Siddhagiri Metals and Tubes. The materials conform to International standards and specifications. ASTM B443 UNS N06625 is available in a variety of sizes and dimensions. Our materials are highly corrosion resistant and cost effective. We have built a reputation for our work in many countries worldwide.

 

Sheet metal is metal formed by an industrial process into thin, flat pieces. It is one of the fundamental forms used in metalworking and it can be cut and bent into a variety of shapes. Countless everyday objects are fabricated from the metal sheet. Plate and sheet are words used to describe the classification of metal depending on its thickness.

 

While sheet metal is less than 3 mm thick, plate metal is obviously thicker than 3 mm. Alloy Plate is used in heavy-duty applications such as those found in the aerospace, military and transportation product manufacturing. Aluminium plate, machined to shape, forms the skins of jets and spacecraft fuel tanks, etc. It is used for storage tanks in many industries, in part because some aluminium alloys become tougher at supercold temperatures. This property is especially useful in holding cryogenic (very-low-temperature) materials.

 

Inconel Plate is also used to manufacture structural sections for railcars and ships, as well as armour for military vehicles. In transportation, the metal sheets are used to manufacture panels for automobile bodies and tractor trailers. In building and construction, it is formed into products including siding, gutters, roofing, awnings and carports. Inconel Sheet Plates are further categorised in following forms:

 

Inconel Sheet: If a piece of metal has been rolled out to a thickness greater than that of a foil, but is still less than 6mm it is called sheet.

 

Inconel Shim Sheet: A shim is thin and often tapered or wedged piece of metal. Shim Sheet is used to fill small gaps or spaces between objects. Sheet Shims are typically used in order to support, adjust for better fit, or provide a level surface.

 

Inconel Rolled Sheet Coil: Sheet Coils are flat products wound into rolls and having a rectangular cross-section, the width of which is much larger than the thickness. Hot Rolled Sheet Coil is produced from semifinished products (slabs or billets), which are reduced to certain thicknesses by rolling and annealing and wound into a roll.

 

Cold Rolled Sheet Coil is produced by removing rust from a hot-rolled sheet by "pickling" it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll. Cold-rolled steel Coil is a more highly finished product and has a smoother surface, greater dimensional accuracy (thickness, width, length) and greater strength.

 

Inconel Rolled Sheet Strips: Sheet Strip is a flat product which, immediately after the final rolling pass or after pickling or continuous annealing is wound into laps so as to form a coil. Strip of Sheet as rolled has slightly convex edges, but it may also be supplied with sheared edges or slit from a wider strip. Wide Strip is a strip of a width 600 mm or over, Whereas, Narrow Strip is a strip of a width less than 600 mm.

 

Inconel Plate: Once the metal is more than 6mm thick it is known as plate metal. This type of material is used in circumstances whereby strength and durability are of the utmost importance.

 

Inconel Diamond Plate: Diamond plate, also known as a chequered plate, thread plate and floor plate, is a type of metal designed with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless. Diamond plate is usually stainless steel or alloy.

 

Siddhagiri Metals and Tubes offers Inconel Sheet and Inconel Plates in a wide range of dimensions. The size range of sheet plate available is 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm. We provide high-quality Inconel 625 plate and Inconel 625 sheet conforming to IS, BS, ASTM, UNS specifications for many applications including custom fabrication and construction projects.

 

We are a reliable suppliers of approved pipes, fittings and flanges as well as special items from European, Indian and Japanese origin, approved to Norsok M-650 for the oil and gas sector, shipyards and land-based industry. We have exported Sheet Plates in many countries namely South Africa, Thailand, Indonesia, Australia, Japan, Malaysia, Canada, Brazil, Chile, UK, Saudi Arabia, Qatar, Iran, Sweden, Turkey, Bangladesh, Myanmar, Norway, Omam, etc.

AMS 5599 coils and Inconel 625LCF foil with thickness ranging from 0.1 to 5.0 mm and widths from 0.5 to 1.2 m

Inconel 625 Plate

HS Code of Inconel 625 nickel alloy

Grade HS Code
Inconel 625 Plate 75062000

What We Offer ?

  • Origin: Indian Origin, European Origin, Japanese Origin
  • Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
  • Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Inconel 625 Alloy Sheet Sizes in Stock

Material Size Thickness Specification Make
Inconel 625 Plate / Sheet / Flat / Coil 1250 mm x 2500 mm 0.1mm to 12 mm Thk IS, BS, ASTM, UNS Indian, European and Japanese origin
1000 mm x 2000 mm
1220 mm x 2440 mm (4' x 8')
1500 mm x 3000 mm
2000 mm x 2000 mm
2000 mm x 4000 mm

Forms of Inconel 625 Plate in Stock

In Stock ASTM B443 UNS N06625 Sheet

ASTM B443 UNS N06625 Sheet

In Stock WNR 2.4856 Plate

WNR 2.4856 Plate

In Stock ASME SB443 N06625 Shim Sheet

ASME SB443 N06625 Shim Sheet

In Stock ASME SB 443 Inconel 625 Foil

ASME SB 443 Inconel 625 Foil

In Stock UNS N06625 Coil

UNS N06625 Coil

In Stock Alloy 625 Strips

Alloy 625 Strips

Exporter of ASME SB443 Werkstoff Nr 2.4856 shim sheet and AMS 5869 annealed plate with MTC, refer properties
  • Chemical Properties
  • Mechanical Properties
  • Physical Properties
  • C Mn Fe S Si Cr Ni Mo Co Al P Nb+Ta Ti
    - - - - - 20.000 58.000 8.000 - - - 3.150 -
    0.100 0.500 5.000 0.015 0.500 23.000 - 10.000 1.000 0.400 0.015 4.150 0.400
  • Yield Strength
    0.2% Proof
    (MPa)
    Tensile strength
    (MPa)
    Elongation
    (% in 50mm)
    Hardness
    (HV)
    MIN 415 830 30.00  
    MAX       197
  • Density lb/cu in 0.305
      gram/cc 8.44
    Melting Range °F 2350
      °C 1290
    Specific Heat Btu/lb°F (J/kg°C)  
         
      0°F (-18°C) 0.096(402)
      70°F (21°) 0.098(410)
      200°F (93°C) 0.102(427)
      400°F (204°C) 0.109(456)
      600°F (316°C) 0.115(481)
      800°F (427°C) 0.122(511)
      1000°F (538°C) 0.128(536)
      1200°F (649°C) 0.135(565)
      1400°F (760°C) 0.141(590)
      1600°F (871°C) 0.148(620)
      1800°F (982°C) 0.154(645)
      2000°F (1093°C) 0.160(670)
    Permeability at 200 Oersted (15.9 kA/m) 1.0006
    Curie Temperature °F <-320
      °C -196


Properties of Inconel 625 alloy

Inconel 625 Cold Forming

Inconel 625 can be cold formed by standard methods. When the material becomes too stiff from cold working, ductility can be restored by process anneal.

Inconel 625 Hot Forming

Hot working may done at 2100°F (1149°C) maximum furnace temperature. Care should be exercised to avoid frictional heat build-up which can result in overheating, exceeding 2100°F (1149°C). Inconel 625 becomes very stiff at temperatures below 1850°F (1010°C). Work pieces that fall below this temperature should be reheated. Uniform reductions are recommended to avoid the formation of a duplex grain structure. Approximately 15/20% reduction is recommended for finishing.

Inconel 625 Machining

Inconel 625 should preferably be machined in the annealed condition. Since Inconel Alloy 625 is prone to work hardening, only low cutting speeds should be used and the cutting tool should be engaged at all times. Adequate cut depth is necessary to assure avoiding contact with the previously formed work-hardened zone.

Inconel 625 Welding

Inconel 625 can be readily welded by conventional processes used for austenitic stainless steel, including fusion and resistance methods. The material should be in the mill annealed condition and thoroughly descaled and cleaned before welding. Preheating is not required and post-weld treatment is not needed to maintain or restore corrosion resistance.

Inconel 625 Heat Treatment

Hot- or cold-formed parts are usually annealed at 1700°-1900°F for times commensurate with thickness; higher temperatures may be used to soften material for additional cold work. Inconel alloy 625 is solution-treated at 2000°-2200°F. These temperatures are metal temperatures based on batch operations and may not apply to continuous annealing, which normally consists of short exposure in the hot zone of a furnace set at higher temperatures. The rate of cooling after heating has no significant effect on Inconel alloy 625.

Services We Offer

Documentation

Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.

Quality Assurance

Inconel Plate Sheets are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.

Material Testing

PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.

Packing and Delivery

The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.

Distrbutor of AMS 5869 hot rolled and cold rolled plate with the necessary documentation as soon as we can, check prices
Countries CIF Price Delivery time
Indonesia $38/- USD per kg Sea: 20 days  |  Air: 3 days
Malaysia $38/- USD per kg Sea: 20 days  |  Air: 3 days
Thailand $38/- USD per kg Sea: 20 days  |  Air: 3 days

Additional service : Small quantity | Custom order | hard to find items | Sourcing from other countries

Let Us Know What You Need

We Cherish All Your Requirements