AISI 904L Stainless Steel Pipe Fittings Manufacturer

Inconel 601 Pipe Fittings

pipe fitting
Sizes in Stock
Alloy 601 Seamless Fittings: 1/2" - 10″
UNS N06601 Welded Fittings: 1/2" - 48"
European & American Standard: ASTM B366, ASME SB 366, UNS N06601, WNR 2.4851
Manufacturing Standard:DIN 2617, ANSI B16.28, DIN 2605, ANSI B16.9, MSS-SP-43, EN10253-1, DIN 28011, DIN 2615, DIN 2616, EN10253-2
Bending Radius : 2D, 1D, 10D, 8D, 6D, 3D, 5D or Custom
Types: Tee, Reducer, Cap, Elbow, Stub End etc.
Bending Angle : 60°, 30°, 90°, 45°, 22.5° or Custom
Delivery Time:
Greece- 25-30 Days
Vietnam : 6-8 Days
MTC Certificate: EN 10204 3.1 and 3.2
Special Test:
Ferrite, IGC, HIC, Grain Size, SSC,

Manufacturer of ASTM B366 UNS N06601 buttweld fittings that include a lower-cost WNR 2.4851 elbow, tee, and reducer as per ASME/ANSI B16.9

Inconel 601 Pipe Fittings


Supplier of nickel alloy 601 seamless and welded fittings in the custom sizes

Inconel 601 Pipe Fittings Specification

UNS N06601 Buttweld Fittings Sizes

UNS N06601 Buttweld Fittings Sizes

  • Seamless Fittings:1/2" - 10″
  • Welded Fittings:1/2" - 48"
  • Standards: MSS-SP-43, ANSI B16.9, ASME B16.28
  • Schedule :SCH 10 To SCH 160
International Standards

International Standards

  • ASTM B366 | ASME SB 366
  • UNS: N06601
  • WNR:2.4851
  • Trade name: Nicrofer® 601, Pyromet® 601

Stockist of nicr23fe weld fittings ranging from 1/2" to 10" (seamless) and 1/2" to 48" (welded)

Inconel 601 Pipe Fittings Density

Inconel 601 Pipe Fittings Density

  • Density: 8.1 g/cm³
  • Melting Point:1411°C or 2571°F
  • Temprature Range:1600°F–2250°F (870°C–1230°C)
  • Life Span: 70 years
Nicr23fe Weld Fittings Types

Nicr23fe Weld Fittings Types

  • Manufacturing Size : 1/2" – 24"
  • Types :Tee, Elbow, Reducer, Cap etc.
  • Process : SMLS, Welded, Buttweld
  • Technique: Hot and Mandrel forming
Packing of Nicrofer® 601 pipe fittings

Packing of Nicrofer® 601 pipe fittings

  • Packed in Wooden Boxes
  • Bubble wraps
  • Steel Strips Bundled
  • AS per Customers Requests
Bending Radius of WNR 2.4851 elbow

Bending Radius of WNR 2.4851 elbow

  • 1D, 1.5D,
  • 2D, 3D
  • 5D, 6D
  • 8D, 10D
Schedule of nicr23fe Pipe Fittings

Schedule of nicr23fe Pipe Fittings

  • SCH 5
  • SCH10
  • SCH40
  • SCH80
  • SCH160
  • SCH XS,SCH XXS
Applications of ASTM B366 UNS N06601 Elbow

Applications of ASTM B366 UNS N06601 Elbow

  • Petrochemicals
  • Gas processing
  • Pharmaceuticals
  • Power generation
  • Seawater equipment
Origin of Werkstoff NR. 2.4851 Stub Ends

Origin of Werkstoff NR. 2.4851 Stub Ends

  • Indian Origin
  • European Origin
  • Japanese Origin


Inconel 601 Pipe Fittings Welding Method

Inconel 601 Pipe Fittings Welding Method

  • SMAW
  • Submerged arc welding
  • TIG
  • GMAW including both MIG and MAG
  • FCAW
ASTM B366 UNS N06601 Buttweld Fittings Meet Requirements

ASTM B366 UNS N06601 Buttweld Fittings Meet Requirements

  • NACE MR0103
  • Sour service
  • MTC EN 10204 3.1/ 3.2 certificate
  • NACE MR0175, NORSOK
  • NACE TM-0284
  • ISO 15156, HIC tested
  • IBR
Nickel Alloy 601 Seamless Fittings American Standard

Nickel Alloy 601 Seamless Fittings American Standard

  • MSS-SP-83
  • ANSI/ ASME B16.28
  • ANSI / ASME B16.9
  • ANSI/ ASME B16.25 (butt welding ends)
  • MSS-SP-43
  • MSS-SP 119 (Monel belled end elbow)
  • MSS-SP-95

Find ASME SB 366 601 inconel weldable pipe fittings in variety of forms and shapes

Forms of Inconel 601 Pipe Fittings

In Stock Inconel 601 Long Radius Pipe Elbows

Inconel 601 Long Radius Pipe Elbows

In Stock Alloy 601 Short Radius Pipe Elbows

Alloy 601 Short Radius Pipe Elbows

In Stock Werkstoff NR. 2.4851 Long Radius Return Bends

Werkstoff NR. 2.4851 Long Radius Return Bends

In Stock ASTM B366 UNS N06601 Short Radius Return Bends

ASTM B366 UNS N06601 Short Radius Return Bends

In Stock Nicr23fe Reducing Elbow Pipe Fittings

Nicr23fe Reducing Elbow Pipe Fittings

In Stock Nickel alloy 601 Pipe Caps

Nickel alloy 601 Pipe Caps

In Stock Inconel alloy 601 Stub Ends

Inconel alloy 601 Stub Ends

In Stock  WNR 2.4851 Pipe Fitting Nipple

WNR 2.4851 Pipe Fitting Nipple

In Stock Pyromet® 601 Equal Tee

Pyromet® 601 Equal Tee

In Stock Nicrofer® 601 UnEqual Tee

Nicrofer® 601 UnEqual Tee

In Stock ASME SB 366 Cross

ASME SB 366 Cross

In Stock Nickel alloy 601 Concentric and Eccentric Reducer

Nickel alloy 601 Concentric and Eccentric Reducer

In Stock WERKSTOFF Nr 2.4851 Collar Pipe Fittings

WERKSTOFF Nr 2.4851 Collar Pipe Fittings

In Stock Pyromet® 601 Coupling

Pyromet® 601 Coupling



Alloy 601 Buttweld Fittings Sizes in Stock

Forms of Pipe Fttings Pipe Fitting Size Range Schedules of Butt weld fittings Dimension Standards
Seamless Pipe Fittings Welded Pipe Fittings
Inconel Return Bends 1/8” NB to 8" NB SCH 5, SCH 5S, SCH 10, SCH 10S, SCH 20, SCH 30, SCH 40S, SCH 40, SCH STD, SCH 60, SCH 80s, SCH 100, SCH 120, SCH XS, SCH XXS, SCH 160, upto 50mm in case of Welded Fittings ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MS SP 75
Inconel Tees 1/8” NB to 24" NB Upto 42" NB
Inconel Reducers 1/8” NB to 24" NB Upto 42" NB
Inconel End Caps 1/8” NB to 24" NB Upto 42" NB
Inconel Swage Nipple 2 1/16” to 30”
Inconel Elbows — 45, 90 & 180 Degree 1/8” NB to 24" NB Upto 42" NB
Inconel Cross 1/8” NB to 8" NB

Inconel alloy 601 Pipe Fittings HS Code

Grade HS Code
Inconel 601 Pipe Fittings 75071200

Check alloy 601 stub end chemical composition and mechanical properties

ASTM B366 UNS N06601 Buttweld Fittings Properties

  • Chemical Properties
  • Mechanical Properties
  • Physical Properties
  • Ni Cr Al C Mn S Si Cu Fe
    MIN 58.000 21.000 1.000 - - - - - Bal
    MAX 63.000 25.000 1.700 0.100 1.000 0.015 0.500 1.000
  • Yield Strength
    0.2% Proof
    (MPa)
    Tensile strength
    (MPa)
    Elongation
    (% in 50mm)
    Hardness
    (HB)
    MIN 205 550 30.00  
    MAX       220
  • Density lb/in³ 0.293
    Mg/m³ 8.11
    Specific Heat 70°F, Btu/lb-°F 0.107
    21°C, J/kg-°C 448
    Melting Range °F 2480-2571
    °C 1360-1411
    Curie Temperature °F <-320
    °C <-196
    Permeability 200 oersted (15.9 kA/m)  
    76°F (24°C) 1.003
      -109°F (-78°C) 1.004
      -320°F (-196°C) 1.016


Properties of Inconel 601 alloy


Inconel 601 Cold Forming

The rate of cooling following hot-working is not critical with respect to thermal cracking. To avoid sensitization, however, the alloy should be cooled rapidly through the 1000-1400°F (540-760°C) temperature range. Inconel alloy 601 is cold-formed by conventional procedures. The alloy's work-hardening rate, is somewhat higher than the rate for Inconel alloy 600 and INCOLOY alloy 800.


Inconel 601 Hot Forming

The temperature range for hot-forming Inconel alloy 601 is 1600-2250°F (870-1230°C). Hot-working operations involving large deformations should be performed at 1900-2250°F (1040-1230°C). The alloy has low ductility at temperatures from 1200 to 1600°F (650-870°C) and should not be worked in that range. Light working at temperatures below 1200°F (650°C) can be done to develop high tensile properties.


Inconel 601 Machining

All standard machining operations are readily performed on Inconel alloy 601. For the best machinability, the alloy should be in the solution-treated condition.


Inconel 601 Welding

Inconel alloy 601 exhibits good weldability and is readily joined by conventional welding products and processes. Welding products are available which provide high joint efficiencies and heat resistance. The choice of welding product is dependent upon the service conditions to which the fabricated alloy 601 component will be exposed. Tensile properties of joints in Inconel alloy 601 are welded by the shielded-metal-arc, gas-tungsten-arc, and gas-metal-arc processes.


Inconel 601 Heat Treatment

Like other high-nickel alloys, Inconel alloy 601 must be clean before it is heated. All foreign substances such as grease, oil, paint, and shop soil must be removed from the material before a heating operation is performed. The alloy must be heated in a low-sulfur atmosphere. Fuels for open heating must be low in sulfur. To prevent excessive oxidation of the material, the furnace atmosphere should also be slightly reducing. Inconel alloy 601 is not strengthened by heat treatment. Broad ranges of strength and hardness, however, can be achieved with the alloy by the combination of cold work and annealing treatments. The amount of cold work and the section size of the material must be considered in establishing an annealing procedure.


Additional service : Small quantity | Custom order | hard to find items | Sourcing from other countries

Let Us Know What You Need

We Cherish All Your Requirements