Inconel 600 Pipe Fittings and Buttweld Fittings Exporter

Incoloy 800 Pipe Fittings

pipe fitting
Sizes in Stock
Alloy 800 Seamless Fittings: 1/2" - 10″
WPNIC Welded Fittings: 1/2" - 48"
European & American Standard: ASTM B366, ASME SB 366, UNS N08800, WNR 1.4876
Manufacturing Standard:EN10253-1, DIN 2615, ANSI B16.28, DIN 2605, ANSI B16.9, DIN 2617, MSS-SP-43, DIN 28011, DIN 2616, EN10253-2
Bending Radius : 5D, 2D, 3D, 10D, 1D, 8D, 6D or Custom
Types: Elbow, Cap, Tee, Reducer, Stub End etc.
Bending Angle :30°, 45°, 22.5°, 90°, 60° or Custom
Delivery Time:
Singapore:6-8 Days
Jordan: 7-8 Days
MTC Certificate: EN 10204 3.1 and 3.2
Special Test:
Ferrite, Grain Size, SSC, IGC, HIC

WPNIC material and UNS N08800 reducer manufacturer in India

Incoloy 800 Pipe Fittings


Supplier of ASTM B366 WPNIC welded fittings and alloy 800 elbow comply with NACE MR0175/ ISO 15156 standard

Incoloy 800 Pipe Fittings Specification

WPNIC Buttweld Fittings Sizes

WPNIC Buttweld Fittings Sizes

  • Welded Butt Weld Fittings:1/2" - 48"
  • Seamless Butt Weld Fittings:1/2" - 10″
  • Standards: ASME B16.28, ANSI B16.9, MSS-SP-43
  • Schedule :SCH 10 To SCH 160
International Standards

International Standards

  • ASTM B366 | ASME SB 366
  • UNS:N08800
  • WNR:1.4876
  • Trade name: Ferrochronin® 800, Nickelvac® 800
Incoloy 800 Pipe Fittings Density

Incoloy 800 Pipe Fittings Density

  • Density:7.94 g/cm³
  • Melting Point:1357-1385°C | 2475-2525°F
  • Temprature Range:1500°F (816°C)
  • Life Span: 30 years
WPNIC Buttweld Fittings Types

WPNIC Buttweld Fittings Types

  • Types : Reducer, Elbow, Tee, Cap etc.
  • Technique: Hot forming, Mandrel
  • Process : SMLS, Buttweld, Welded,
  • Manufacturing Size : 1/2" – 24"
Applications of B366 WPNIC Elbow

Applications of B366 WPNIC Elbow

  • Petrochemicals
  • Gas processing
  • Pharmaceuticals

Origin of Incoloy 800 WPNIC Stub Ends

Origin of Incoloy 800 WPNIC Stub Ends

  • Indian Origin
  • European Origin
  • Japanese Origin
Packing of B366 Gr.WPNIC pipe fittings

Packing of B366 Gr.WPNIC pipe fittings

  • Packed in Wooden Boxes
  • Bubble wraps
  • AS per Customers Requests
Bending Radius of ASTM B366 WPNIC elbow

Bending Radius of ASTM B366 WPNIC Elbow

  • 1D, 1.5D, 5D, 6D
  • 2D, 3D
  • 8D, 10D
B366 UNS N08800 Pipe Fittings Bending Method

B366 UNS N08800 Pipe Fittings Bending Method

  • Ram-Type Bending,
  • Rotary Draw Bending
  • Mandrel Bending
  • Hot Induction Bending, Roll Bending
Schedule of Nickel 800 Pipe Fittings

Schedule of Nickel 800 Pipe Fittings

  • SCH 5
  • SCH10, SCH XS
  • SCH40
  • SCH80, SCH XXS
  • SCH160
UNS N08800 Reducer DIN Standards

UNS N08800 Reducer DIN Standards

  • DIN 28011 (Torispherical heads)
  • DIN 2615-1 (Tee)
  • DIN 2618 (saddle)
  • DIN 2615-2 (Tee)
  • DIN 2605-1 (Elbow)
  • DIN 2617 (Caps)
  • DIN 2616-2 (Concentric Reducer)
  • DIN 2605-2 (Elbow)
  • DIN 2616-1 (Eccentric Reducer)
Alloy 800 Elbow Meet Requirement

Alloy 800 Elbow Meet Requirement

  • ISO 15156
  • Sour service
  • NACE MR0175
  • MTC EN 10204 3.1/ 3.2 certificate
  • NACE MR0103
  • HIC tested
  • NACE TM-0284
  • NORSOK
  • IBR

Buy nickel alloy 800 seamless pipe fittings and ASTM B366 UNS N08800 tee in perfect beveling as per ASME B16.9

Incoloy 800 pipe fittings


Forms of Incoloy 800 Pipe Fittings

In Stock B366 WPNIC Long Radius Pipe Elbows

B366 WPNIC Long Radius Pipe Elbows

In Stock Incoloy 800 WPNIC Short Radius Pipe Elbows

Incoloy 800 WPNIC Short Radius Pipe Elbows

In Stock B366 Gr.WPNIC Long Radius Return Bends

B366 Gr.WPNIC Long Radius Return Bends

In Stock ASTM B366 WPNIC Short Radius Return Bends

ASTM B366 WPNIC Short Radius Return Bends

In Stock ASTM B366 Grade WPNIC Reducing Elbow Pipe Fittings

ASTM B366 Grade WPNIC Reducing Elbow Pipe Fittings

In Stock ASTM B366 UNS N08800 Pipe Caps

ASTM B366 UNS N08800 Pipe Caps

In Stock B366 UNS N08800 Stub Ends

B366 UNS N08800 Stub Ends

In Stock UNS N08800 Pipe Fitting Nipple

UNS N08800 Pipe Fitting Nipple

In Stock Incoloy alloy 800 Equal Tee

Incoloy alloy 800 Equal Tee

In Stock Nickel 800 UnEqual Tee

Nickel 800 UnEqual Tee

In Stock ASME SB 366 UNS N08800 Cross

ASME SB 366 UNS N08800 Cross

In Stock Werkstoff nr 1.4876 Concentric and Eccentric Reducer

Werkstoff nr 1.4876 Concentric and Eccentric Reducer

In Stock ASTM B366 N08800 Collar Pipe Fittings

ASTM B366 N08800 Collar Pipe Fittings

In Stock ASTM B366 gr.WPNIC Coupling

ASTM B366 gr.WPNIC Coupling



HS Code of ASTM B366 N08800 Pipe Fittings

Grade HS Code
Inconel 800 Pipe Fittings 75051220

DIN/ European standard Incoloy 800 weldable pipe fittings and UNS N08800 stub end stockist in Mumbai, get quote for custom drawing

WPNIC Fittings Sizes in Stock

Dimension Standards Forms of Pipe Fttings Pipe Fitting Size Range Schedules of Butt weld fittings
Seamless Pipe Fittings Welded Pipe Fittings
ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MS SP 75 Incoloy Return Bends 1/8” NB to 8" NB SCH 5, SCH 5S, SCH 10, SCH 10S, SCH 20, SCH 30, SCH 40S, SCH 40, SCH STD, SCH 60, SCH 80s, SCH 100, SCH 120, SCH XS, SCH XXS, SCH 160, upto 50mm in case of Welded Fittings
Incoloy Tees 1/8” NB to 24" NB Upto 42" NB
Incoloy Reducers 1/8” NB to 24" NB Upto 42" NB
Incoloy End Caps 1/8” NB to 24" NB Upto 42" NB
Incoloy Swage Nipple 2 1/16” to 30”
Incoloy Elbows — 45, 90 & 180 Degree 1/8” NB to 24" NB Upto 42" NB
Incoloy Cross 1/8” NB to 8" NB

Exporter of DIN 1.4876 butt welded fittings and ASTM B366 grade WPNIC pipe bend at lowest price in India, Refer Properties

ASTM B366 WPNIC Elbow Chemical Composition


  • Chemical Properties
  • Mechanical Properties
  • Physical Properties
  • C Ti Mn Fe S Si Cr Ni Cu Al
    MIN - 0.150 - 39.500 - 19.000 30.000 - 0.150
    MAX 0.100 0.600 1.500 0.015 1.000 23.000 35.000 0.750 0.600
  • Yield Str0.2% Proof(MPa) Tensile Str(MPa) Elong(% in 2mm) Hardness HV
    205 520 30.00 -
    - - - 182
  • Density lb/in³ 0.287
    g/cm³ 7.94
    Specific Heat (32-212°F), Btu/lb•°F 0.11
    (0-100°C), J/kg•°C 460
    Melting Range °F 2475-2525
    °C 1357-1385
    Curie Temperature °F -175
    °C -115
    Permeability 70°F (21°C) & 200 oersted (15.9 kA/m)  
    Annealed 1.014
      Hot-Rolled 1.009

Properties of Incoloy 800 alloy


Incoloy 800 Cold Forming

Cold forming of Incoloy 800 is done by procedures similar to those used for Inconel Alloy 600 and Stainless Steel. The work-hardening rate for Inconel 800, is higher than the rate for mild steel but lower than that for Type 304 stainless steel. The work-hardening rate for is essentially the same as the rate for Inconel 600.


Incoloy 800 Hot Forming

Hot forming of Incoloy 800 is done in the temperature range of 1600 to 2200°F (870 to 1200°C). Heavy forging should be done at temperatures from 1850°F to 2200°F (1010°C to 1200°C). Forming at temperatures between 1200 and 1600°F (650-870°C) can result in cracking of the workpiece. The rate of cooling following hot forming is not critical with respect to thermal cracking. However, the alloy is subject to carbide precipitation in the 1000-1400°F (540- 760°C) temperature range and should be cooled rapidly through that range to avoid sensitization.


Incoloy 800 Machining

Incoloy 800 is readily machined by standard methods. Turning operations can be performed with high metal removal rates, good tool life, and good surface finish using coated carbide tools. Good results have also been obtained with high-speed-steel tools, which are better for interrupted cutting. Coated carbide tools have shown good life at cutting speeds of 110-190 sfpm (33.5-57.9 m/min) and a feed of 0.008-0.035 ipr (0.20-0.89 mm/rev.). High speed steel tools have been shown to have good life at cutting speeds of 35- 95 sfpm (10.7-29.0 m/min) and a feed of 0.008-0.035 ipr (0.20-0.89 mm/rev.).


Incoloy 800 Welding

Incoloy 800 has good weldability by all welding processes. Material to be welded must be thoroughly clean, and the proper joint designs must be used. For shielded metal-arc welding of Alloy 800, the recommended welding product is Inco-Weld a Electrode. For gas-tungsten-arc, gas-metal-arc, and submerged-arc welding, Inconel Filler Metal 82 is recommended. Incoflux 4 Submerged Arc Flux is used with the submerged-arc process. These products may be used for most dis-similiar welding requirements with Incoloy 800 as well.


Incoloy 800 Heat Treatment

All material to be heated must be clean. Oil, paint, grease, shop soil and other foreign substances must be removed prior to the heating operation. Heating must be performed in a low-sulfur atmosphere. Open heating must be done with low-sulfur fuel, and the furnace atmosphere must be maintained in a reducing condition to prevent excessive oxidation. Because of the readiness with which chromium is oxidized into a refractory oxide by air, carbon dioxide or water vapor, alloy 800 cannot be bright annealed in the usual industrial annealing furnace. Under closely controlled conditions, the alloy can be bright annealed in dry, pure hydrogen (dew point of -73°F (-58°C) or lower, less than 0.004% by volume water, and less than 0.007% by volume air).


Additional service : Small quantity | Custom order | hard to find items | Sourcing from other countries

Let Us Know What You Need

We Cherish All Your Requirements