ASTM B407 UNS N08810 Pipe

Sizes in Stock
ASME SB 407 N08810 Seamless Pipe: OD: 3- 600mm, Wall Thickness: 0.5-30mm
ASTM B407 UNS N08810 Seamless Tube: OD: .375-1", Wall Thickness: .035- .065"

European & American Standard: ASTM B407, ASME SB 407, UNS N08810, WNR 1.4958, DIN 17459, VdTüV 412 & 434, ISO 6207, BS3 3074NA15

Delivery Time:
Angola: 17-19 Days
UAE: 7-8 Days
Vietnam : 6-8 Days

MTC Certificate: EN 10204 3.1 and 3.2

Non-Magnetic

Testing:
ASTM E140, E8, E38, E1473, E18, E10

Reputable ASME SB 407 N08811 nickel-iron-chromium alloy seamless tube stockist in India

Supplier of ASTM B 407 material in the form of hot-finished and cold-worked annealed seamless pipe with OD 3- 600mm in Mumbai

ASTM B407 UNS N08810 Pipe Specification

ASTM B 407 Seamless Pipe

OD: 3- 600mm
Wall Thickness:0.5-30mm
Length:0.5- 12 meter

ASME SB 407 Seamless Tube

OD: .375" to 1"
Thickness: .035" to .065"
Length: cut to size

Offer ASTM B407 seamless pipe tested with tension test and planimetric method of measurement at the lowest cost

About ASME SB 407 N08810 Tube

Testing: Tension Test and Planimetric
Form: Round, Hydraulic, Coil, Straight etc.
Density:7.94 g/cm³
Melting Point:1350–1400°C

International Specification

ASTM B407 | ASME SB 407
Grades Covered: Incoloy 800, 800H, 800HT
UNS: N08800 | N08810 | N08811
WNR:1.4876 | 1.4958 | 1.4859

Request a quote for ASME SB 407 seamless tube which have standard operating temperatures up to and including 1100°F (593°C)

Chemical Composition Limits

Elements	Incoloy 800, Incoloy 800H and Incoloy 800HT
Nickel	30.0 min 35.0 max
Chromium	19.0 min 23.0 max
Iron	39.5 min
Manganese	1.5
Carbon	-
Copper, max	0.75
Silicon	1.0
Sulfur, max	0.015
Aluminum	0.15 min 0.60 max
Titanium	0.15 min 0.60 max

Mechanical Properties and Other Requirements

Grade	Condition	Yield Strength, (0.2% offset), min, psi (MPa)	Tensile Strength, min, psi (MPa)	Elongation in 2 inches or 50 mm (or 4D), min%
Incoloy 800 (UNS N08800)	Cold-worked annealed	30 000 (205)	75 000 (520)	30
Incoloy 800 (UNS N08800)	Hot-finished annealed or hot-finished	25 000 (170)	65 000 (450)	30
Incoloy 800H (UNS N08810)	Hot-finished annealed or cold-worked annealed	25 000 (170)	65 000 (450)	30
Incoloy 800HT (UNS N08810)	Hot-finished annealed or cold-worked annealed	25 000 (170)	65 000 (450)	30

SB 407 material standards cover the UNS N08120, N08810, N08811, and N08890 alloys, refer dimensions

Dimension and Permissible Variation

Permissible Variation
Specified or Calculated Nominal Outside Diameter	Outside Diameter or Inside Diameter		Wall Thickness,%
Specified or Calculated Nominal Outside Diameter	+	-	+	-
Cold -Finished Pipes and Tubes, (Inches)
0.500 to 5⁄8, excl	0.005	0.005	15.0	15.0
5⁄8 to 11⁄2, incl	0.0075	0.0075	10.0	10.0
Over 1 1⁄2 to 3 1⁄2, incl	0.010	0.010	10.0	10.0
Over 3 1⁄2 to 4 1⁄2, incl	0.015	0.015	10.0	10.0
Over 4 1⁄2 to 6, incl	0.020	0.020	12.5	12.5
Over 6 to 6 5⁄8, incl	0.025	0.025	12.5	12.5
Millimeters
12.7 to 15.8, excl	0.127	0.127	15.0	15.0
15.8 to 38.1, incl	0.190	0.190	10.0	10.0
Over 38.1 to 88.9, incl	0.254	0.254	10.0	10.0
Over 88.9 to 114.3, incl	0.381	0.381	10.0	10.0
Over 114.3 to 152.4, incl	0.508	0.508	12.5	12.5
Over 152.4 to 168.3, incl	0.635	0.635	12.5	12.5
Hot-Finished Tube, (Inches)
2 1⁄2 to 5 1⁄2, excl	0.031	0.031	12.5	12.5
5 1⁄2 to 9 1⁄4, incl	0.047	0.047	12.5	12.5
Millimeters
63.5 to 139.7, excl	0.787	0.787	12.5	12.5
139.7 to 234.9, incl	1.19	1.19	12.5	12.5

ASTM B407 Seamless Pipes
Seamless Pipe	Grade	UNS No	ASTM No
	ASTM B407 Incoloy 800 ASTM B407 Incoloy 800H ASTM B407 Alloy 800HT ASTM B407 Alloy 800 ASTM B407 Alloy 800H	ASTM B407 UNS N08800 ASTM B407 UNS N08810 ASTM B407 UNS N08811	ASTM B407 Alloy 800 ASTM B407 Alloy 800H ASTM B407 Alloy 800HT ASTM B407 Incoloy ASTM B407 Incoloy Alloy

ASTM B407 Seamless Tube
Seamless Tube	Grade	UNS No	ASTM No
	ASTM B407 Incoloy 800 ASTM B407 Incoloy 800H ASTM B407 Alloy 800HT ASTM B407 Alloy 800 ASTM B407 Alloy 800H	ASTM B407 UNS N08800 ASTM B407 UNS N08810 ASTM B407 UNS N08811	ASTM B407 Alloy 800 ASTM B407 Alloy 800H ASTM B407 Alloy 800HT ASTM B407 Incoloy ASTM B407 Incoloy Alloy

ASTM B407 Seamless Pipe NB Sizes and Schedule Chart

NB Sizes	Sch 5	Sch 10	Sch 40	Sch 80	Sch 160
1/8″	✔	✔	✔	✔
1/4″	✔	✔	✔	✔
3/8″	✔	✔	✔	✔
1/2″	✔	✔	✔	✔	✔
3/4″	✔	✔	✔	✔	✔
1″	✔	✔	✔	✔	✔
1 1/4″	✔	✔	✔	✔	✔
1 1/2″	✔	✔	✔	✔	✔
2″	✔	✔	✔	✔	✔
2 1/2″	✔	✔	✔	✔	✔
3″	✔	✔	✔	✔	✔
3″	✔	✔	✔	✔	✔

Why Siddhagiri Metals & Tubes ?

PED 2014/68/ EU Approved Manufacturer for Steel Forgings.
Stockist, Wholesaler, Retailer and Trader of Steel Bars, Bolts and Nuts, Machined Components in Nickel Alloys, High Temperature Alloys, Super Alloys
Rank in Top 5 Exporter of Nickel Alloy Forgings in India and 73rd Position in Asia As Per Import and Export data of 2022
Supplying Oil and Gas Piping Products As Per Standard NACE MR0175 / ISO 15156 to the Netherlands, Tunisia, South Africa, Azerbaijan, Saudi Arabia, Alzeria, Morocco and Egypt Since 2002.
India's Largest Importer and Stockholder of Bolting Accessories in Ferrous and Non Ferrous Metals.