ISO 9001:2015 Certified · CRISIL Rated · PED Certified · Trusted Global Exporter

Slip On Flange · Hubbed Flange · SO Flange


Slip On Pipe Flange Supplier | SO Flange Supplier | Hubbed Flange Supplier

Hubbed Flange or Slip On Flange, has a diameter slightly larger than the pipe so that it can slide over the pipe to fit snugly. Though SO Flange are thinner than most other flanges, they are strong, dependable, and cost-effective. Slip On Flange usually have a neck and have a straight bore that the pipe will pass completely through. The installer will slip the flange onto the pipe end and position the flange so that a fillet weld on the neck to the pipe, and a fillet weld inside the bore of the flange between the end of the pipe and the bore of the flange, will secure and seal the connection. As made obvious by their name, Slip On Flange slip over the pipe. Hubbed Flange manufactured with an inside diameter that is slightly bigger than the pipe's outside diameter. These attachments are connected to the pipe via fillet weld at the top and bottom of the flange. SO Flange are typically provided with a raised or flat face. When a raised face is necessary for slip on pipe flanges, the standard height is 1/16" for SO Flange under 400#. For Slip On Flange of 400# and up, the standard Slip On Flange raised face height is 1/4".

Hubbed Flange is essentially a ring that is placed over the pipe end, with the flange face extending from the end of the pipe by enough distance to apply a weld bead on the inside diameter. The OD of Hubbed Flange is also welded on the back side of the flange. SO Flange have a lower material cost than Slip On Flange and are more easily aligned. Slip On Flange may also be used a lap joint flanges if Type B or Type C stub ends are used. Slip On Flange or Hubbed Flange are commonly lower in price than weld-neck flanges, and to this effect are a popular choice for our customers. However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation. Moreover, weld-neck flanges have a higher life expentancy than SO Flange under duress. Hubbed Flange is positioned so the inserted end of the pipe or fitting is set short of the flange face by the thickness of the pipe wall plus 1/8 of an inch, which thus allows for a fillet weld inside the Slip On Flange equal without doing any damage to the flange face. The back or outside of the SO Flange or Slip On Flange is also welded with a fillet weld.

Slip On Flange ASME B16.5

Slip On Pipe Flange | SO Flange | Hubbed Flange

  • Size: 1/2″ (15 NB) to 48″ (1200NB).
  • Class: 150lbs, 300lbs, 400lbs, 600lbs, 900lbs, 1500lbs, 2500lbs.
  • Types: Slip On Flange, SO Flange, Hubbed Flange, Slip On Pipe Flange.
  • Standard: ANSI B16.5, ANSI B16.47 Series A and B, MSS SP44, ASA, API-605, AWWA, Custom Drawings.
  • Pressure: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.
  • Packing: No Fumigate or Fumigate Plywood/Wood Pallet or Case.
  • Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized.
  • Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ).
  • Value Added Services: CNC Machining, Customised Flanges.
  • Application: Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc.
  • Material: Inconel, Incoloy, Monel, Hastelloy, Copper Nickel, Alloy 20, Nickel 200, Nickel 201, AISI 4130, Titanium, Brass, Stainless Steel, Duplex 2205, Super Duplex, SMO 254.

Available Materials

Slip On Flange Supplier, Manufacturer and Exporter

Slip On Flange also known as Hubbed Flange or Slip-On Flange, supplied by Siddhagiri Metals and Tubes in more than 70 countries like Slip On Flange supplier in United States, Slip On Flange supplier in Germany, Slip On Flange supplier in China, Slip On Flange supplier in South Korea, Slip On Flange supplier in Italy, Slip On Flange supplier in France, Slip On Flange supplier in Thailand, Slip On Flange supplier in Canada, Slip On Flange supplier in Netherlands, Slip On Flange supplier in Mexico, Slip On Flange supplier in Turkey, Slip On Flange supplier in Belgium, Slip On Flange supplier in Saudi Arabia, Slip On Flange supplier in India, Slip On Flange supplier in Poland, Slip On Flange supplier in United Arab Emirates, Slip On Flange supplier in Indonesia, Slip On Flange supplier in Japan, Slip On Flange supplier in United Kingdom, Slip On Flange supplier in Taiwan, Slip On Flange supplier in Spain, Slip On Flange supplier in Vietnam, Slip On Flange supplier in Malaysia, Slip On Flange supplier in Russian Federation, Slip On Flange supplier in Czech Republic.

Siddahagiri Metals and Tubes is an ISO 9001:2015 Certified and CRISIL MSE 4 Rated leading supplier, manufacturer and exporter of Hubbed Flange in grades like Inconel Slip On Flange, Incoloy Slip On Flange, Monel Slip On Flange, Hastelloy Slip On Flange, Copper Nickel Slip On Flange, Alloy 20 Slip On Flange, Nickel 200 Slip On Flange, Nickel 201 Slip On Flange, AISI 4130 Slip On Flange, Titanium Slip On Flange, Brass Slip On Flange, Stainless Steel Slip On Flange, Duplex 2205 Slip On Flange, Super Duplex Slip On Flange, SMO 254 Slip On Flange.

Siddhagiri Metals and Tubes not only stock certain sizes of Slip On Flange, but has been a reputable source for them for over thirty years. Siddhagiri Metals and Tubes known as the best Slip On Flange manufacturer in India and counted among the prompt and excellent SO Flange. Slip On Flange offered by Siddhagiri Metals and Tubes at competitive rates to the clients. Siddhagiri Metals and Tubes offer Slip On Flange to our clients at competitive prices. SO Flange available in grades like SS 316h Slip-on Flange, SS 304h Slip-on Flange, SS 316l Slip-on Flange, Alloy 20 Slip-on Flange, Hastelloy B2 Slip-on Flange, Hastelloy C276 Slip-on Flange, SS 321 Slip-on Flange, SS 347 Slip-on Flange, SS 304 304l Slip-on Flange, SS 304 304l Slip-on Flange, Incoloy 825 Slip-on Flange, Hastelloy C22 Slip-on Flange, SS 316ti Slip-on Flange, SS 330 Slip-on Flange, Incoloy 800 Slip-on Flange, Titanium Grade 1 Slip-on Flange, Super Duplex 4501 Slip-on Flange, SS 347h Slip-on Flange, Copper Nickel 90 10 Slip-on Flange, SS 904l Slip-on Flange, SS 310 Slip-on Flange, SS 321h Slip-on Flange, 254 Smo Slip-on Flange, Duplex 2205 Slip-on Flange, SS 317l Slip-on Flange, Monel 400 Slip-on Flange, Inconel 601 Slip-on Flange, SS 309 Slip-on Flange, Copper Nickel 70 30 Slip-on Flange, Inconel 600 Slip-on Flange, Titanium Grade 2 Slip-on Flange, Aisi 4130 Steel Slip-on Flange, Nickel 200 Slip-on Flange, Nickel 201 Slip-on Flange, Super Duplex 2507 Slip-on Flange, Inconel 625 Slip-on Flange.