Monel 400 Tube Fittings
Siddhagiri Metals and Tubes supplies high-precision Monel 400 Tube Fittings for critical industrial applications.
Other Names: Monel 400 Compression Tube Fittings, Monel 400 Instrumentation Fittings, Ferrule Fittings, Monel Tube Fittings, Alloy 400 Tube Fittings
Material: Monel 400
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
Monel Compression Tube Fittings • Monel Fittings Supplier • Monel 400 Tube Fittings • Alloy 400 Ferrules Supplier
Siddhagiri Metals and Tubes supplies a comprehensive range of Monel 400 Tube Fittings, for industrial tubing systems. Our Monel Tube Fittings are Swagelok S-lok and Parker A-lok replacable and conform to international standards and guidelines. Monel Alloy 400 Compression Tube Fittings have many used in high-temperature, seawater and acidic environments.
The two ferrules in Monel tube fittings separate sealing and tube gripping functions; each ferrule is optimised for its function. The front ferrule creates a seal against the fitting body and on the tubing outside diameter. As the nut is turned, the back ferrule axially advances the front ferrule and radially applies an effective tube grip. Dimensions of ferrule fittings range from 6mm to 38mm in OD and 1/4" to 1 1/2" in inches. Tube Fittings are used in a wide range of Industries including Petrochemicals, Energy, Food, Biotechnology, CNG, Pharmaceutical, Pulp and Paper, Mining, Marine, Packing and Printing Industries etc. Following are different types of tube fittings as per design, installation and maintenance -
Monel Compression Fittings — Compression Tube Fittings are the first tube fittings to come into existence. Its three components nut, body and gasket ring or ferrule use a friction grip on the tube. Thus, no special tool is required in assembling such types of fittings. Some major types of Tube Fittings are Tube to Union Fittings, Tube to Male Fittings, Tube to Female Fittings, Tube to Pipe Fittings and Tube Fittings Accessories. Its seals are often line-type, providing one of the most effective metal-to-metal seals.
Monel Flare Fittings / Ferrule Fittings — Flare Fitting is made up of a nut, sleeve and body with a flare or coned end. Often, the sleeve is used as a self-flaring option, usually on the thinner wall or softer tubing materials. Flare FittingS can handle high pressures because of its larger seal area and is available in a variety of alloy and stainless steel grades. However, special flaring tools are required to prepare the tubing for installation. Flare Fittings are often referred as Ferrule Fittings.
Siddhagiri Metals and Tubes is an ISO 9001:2015 certified company which has built a strong reputation in the industry for delivering only the highest quality Monel Tube Fittings. Our Monel 400 tube fittings are Swagelok and Parker A-lok equivalent and can be replaced with them easily. We have developed a very broad range of products which serve a large variety of service applications in different sectors of the industry. We offer Monel 400 Tube Fittings in various forms like Tube to Union Fittings, Tube to Male Fittings, Tube to Female Fittings, Tube to Pipe Fittings and Tube Fitting Accessories. Monel Tube Fittings are available in tube sizes ranging from 1/16 to 2 in. and 2 to 50 mm. We supply tube fittings of Indian, European and Japanese origin. Monel 400 Tube Fittings and Monel 400 Ferrule Fittings supplied by us are packed in wooden boxes, bubble wraps, bundled steel strips or as per client requirements.
Siddhagiri Metals and Tubes treats all our customers as our partners and works with a goal to ensure their complete satisfaction every time, all the time. We are a leading manufacturer and exporter of industrial fittings and valves, tubing and Pipe Fittings and ferrule fittings which are integral components in the process control industries. We strive for innovative product design and have mastered the expertise of advanced manufacturing machines and techniques. We know the importance of our products in the industrial setting and that is why we offer the ultimate services in efficiency and dependability. We have regular exports of Monel Tube Fittings or Monel Ferrule Fitting in Europe, Qatar, Australia, Iran, Indonesia, Russia, UAE, Saudi Arabia, Malaysia, Congo, Brazil, Chile, USA, Canada, Japan, South Africa, Sri Lanka, Uk, etc.
- Tube Fittings Specification: UNS N04400, WNR /DIN 2.436, NA 13, NiCu30Fe &BS NA 30
- Type: Tube to Union Fittings, Tube to Male Fittings, Tube to Female Fittings, Tube to Pipe Fittings, Tube Fitting Accessories
- Forms: Monel 400 Union Tee, Monel 400 Bulhead Union, Monel 400 Union Elbow, Monel 400 Reducing Elbow, Monel 400 Union, Monel 400 Union Cross, Monel 400 Male Connector, Monel 400 Male Connector, Monel 400 Male Connector, Monel 400 Male Connector, Monel 400 Male Bulkhead Connector, Monel 400 Male Elbow, Monel 400 Male Elbow, Monel 400 Male Elbow, Monel 400 Male Elbow, Monel 400 Male Elbow, Monel 400 Male Elbow, Monel 400 Male Elbow 45 Degree, Monel 400 Male Run Tee, Monel 400 Male Branch Tee, Monel 400 Female Connector, Monel 400 Female Connector, Monel 400 Female Connector, Monel 400 Female Connector, Monel 400 Female Connector, Monel 400 Female Bulkhead Connector, Monel 400 Female Run Tee, Monel 400 Female Branch Tee, Monel 400 Male Tee, Monel 400 Street Tee, Monel 400 Female Tee, Monel 400 Male Female Branch Tee, Monel 400 Female Cross, Monel 400 Female Elbow, Monel 400 Male Elbow, Monel 400 Street Elbow, Monel 400 Female Elbow, Monel 400 45º Street Elbow, Monel 400 Male Female Adapter, Monel 400 Bushing, Monel 400 Hex Coupling, Monel 400 Reducing Hex Coupling, Monel 400 Hex Nipple, Monel 400 Reducing Monel 400 Hex Nipple, Monel 400 Female Cap, Monel 400 Allen Key, Monel 400 Union Joint Ball, Monel 400 Blanking End, Monel 400 Blanking Plug, Monel 400 Tube Nut, Monel 400 Front Ferrule, Monel 400 Back Ferrule
- End Protection: Plastic Caps
- Origin: Indian Origin, Os-Lok Tube Fittings
- Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
- Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests
Monel 400 Tube Fittings Sizes in Stock
|Tube Fittings Types||Forms of Tube Fittings||Size OD||Size Inch|
|Tube To Union||Union Tee, Monel Bulkhead Union, Monel Union Elbow, Monel Reducing Elbow, Monel Union, Monel Union Cross||6mm to 38mm||1/4" to 1 1/2"|
|Tube to Male Fittings||Monel Male Connector NPT—MCN (Imperial Series), Monel Male Connector NPT — MMCN(Metric, Series), Monel Male Connector BSP : MCB & MMCB, Monel Male Connector BSPP MCBP & MMCBP, Monel Male Bulkhead Connector —NPT—MBCN & MMBCN, Monel Male Elbow NPT Imperial Serices, Monel Male Elbow NPT (Metric Series), Monel Male Elbow NPT BSP : MEB & MMEB, Monel Male Elbow NPT Imperial Series, Monel Male Elbow NPT (Metric Series), Monel Male Elbow NPT BSP : MEB & MMEB, Monel Male Elbow 45 Degree, Monel Male Run Tee, Monel Male Branch Tee|
|Tube to Female Fittings||Monel Female Connector BSP / BSPP, Monel Female Connector NPT METRIC SERIES, Monel Female Connector BSP / BSPP, Monel Female Connector NPT METRIC SERIES, Monel Female Connector BSP / BSPP, Monel Female Bulkhead Connector, Monel Female Run Tee, Monel Female Branch Tee|
|Tube to Pipe Fittings||Monel Male Tee, Monel Street Tee, Monel Female Tee, Monel Male Female Branch Tee, Monel Female Cross, Monel Female Elbow, Monel Male Elbow, Monel Street Elbow, Monel 45º Female Elbow, Monel 45º Street Elbow, Monel Male Female Adapter, Monel Bushing, Monel Hex Coupling, Monel Reducing Hex Coupling, Monel Hex Nipple, Monel Reducing Hex Nipple, Monel Female Cap, Monel Allen Key, Monel Union Joint Ball|
|Tube Fittings Accessories||Monel Blanking End, Monel Blanking Plug, Monel Tube Nut, Monel Front Ferrule, Monel Back Ferrule|
Forms of Compression Tube Fittings in Stock
Tube To Tube Union
Monel 400 Tube To Tube Union Tube Fittings
Monel 400 Male Connector — NPT, BSP, BSPP MCBP and MMCBP
Monel 400 Female Connector BSP / BSPP and NPT Metric Series
Male Bulkhead Connector
Monel 400 Male Bulkhead Connector NPT-MBCN and MMBCN
Female Bulkhead Connector
Monel 400 Female Bulkhead Connector Compression Tube Fittings
Monel 400 Street Elbow Instrumentation Fittings
Monel 400 Male Elbow Instrumentation Fittings
Monel 400 Female Elbow Instrumentation Fittings
Monel 400 Street Tee — Tube to Pipe Fittings
Male Run Tee
Tube to Male Fittings — Monel 400 Male Run Tee
Female Run Tee
Tube to Female Fittings — Monel 400 Female Run Tee
Male Branch Tee
Tube to Male Fittings — Monel 400 Male Branch Tee
Female Branch Tee
Tube to Female Fittings — Monel 400 Female Branch Tee
Tube to Union Fitting — Monel 400 Union Cross
Tube to Pipe Fittings — Monel 400 Male Adapter
Tube to Pipe Fittings — Monel 400 Female Adapter
Tube to Pipe Fittings — Monel 400 Bushing
Tube to Pipe Fittings — Monel 400 Hex Coupling
Tube to Pipe Fittings — Monel 400 Hex Nipple
Tube to Pipe Fittings — Monel 400 Cap
Tube to Pipe Fittings — Monel 400 Blanking Plug
Tube to Pipe Fittings — Monel 400 Allen Key
Union Ball Joint
Tube to Pipe Fittings — Monel 400 Union Ball Joint
Tube Fittings Accessories — Monel 400 Blanking End
Tube Fittings Accessories — Monel 400 Blanking Plug
Tube Fittings Accessories — Monel 400 Tube Nut
Tube Fittings Accessories — Monel 400 Front Ferrule
Tube Fittings Accessories — Monel 400 Back Ferrule
C Ni Mn Fe S Si Cu MIN - 63.000 - - - - 28.000 MAX 0.300 2.000 2.500 0.024 0.500 34.000
(% in 50mm)
MIN 195 480 35.00 MAX 131
Density g/cm³ 8.8 lb/in³ 0.318 Melting Range °F 2370-2460 °C 1300-1350 Modulus of Elasticity ksi 103 Curie Temperature °F 70-120 °C 21-49 Torsion 9.5 Poisson's Ratio 0.32 Tension 26
Properties of Monel 400 alloy
Alloy 400 Cold Forming
Alloy 400 displays excellent cold forming characteristics. Soft Die materials can be used for a better finish.
Alloy 400 Hot Forming
Alloy 400 can be hot-formed into any shape. The Hot working temperature range for this alloy must be between 648-1176°C (1200-2150°F).
Alloy 400 Machining
Alloy 400 can be machined at satisfactory rates with machine tools generally used for iron alloys.
Alloy 400 Welding
Welding Methods for Alloy 400 is similar to austenitic stainless steels. Alloy 400 can easily be joined by gas-tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals.
Alloy 400 Heat Treatment
Heat treatment for alloy 400 should be done in a sulfur-free environment. Annealing cycle for alloy 400 should range from 1300 to 1800°F, however, 1600 to 1800°F is most typical.
Services We Offer
Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.
Monel Ferrules are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.
PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
Packing and Delivery
The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.