ISO 9001:2015 Certified · CRISIL Rated · PED Certified · Trusted Global Exporter
Inconel 625

Inconel Alloy 625 · Inconel 625 · Alloy 625 · Nickel 625 · UNS N06625 · WNR 2.4816


Get Quote

Inconel Alloy 625 Supplier | Inconel Alloy 625 Manufacturer | Inconel Alloy 625 Expoter | Inconel Alloy 625 Stockist | Inconel Alloy 625 Distributor

Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance.

Inconel 625 is a solid-solution matrix-stiffened face-centered-cubic alloy. The alloy may contain carbides, which are inherent in this type of alloy. Carbides that can be found are MC and M6C (rich in nickel, niobium, molybdenum, and carbon). In addition M23C6, a chromium-rich carbide, appears in solution-treated material exposed at lower temperatures. The hardening effect that takes place in the material on exposure in the range centered around 1200°F (See Mechanical Properties section) is due to sluggish precipitation of a nickel-niobium-rich phase, gamma prime. This phase gradually transforms to orthorhombic Ni3Nb when the alloy is heated for long times in the intermediate temperature range. Extensive investigation of the stability of Inconel Alloy 625 following exposure for extended periods in the 1000° to 1800°F temperature range has shown complete absence of embrittling intermetallic phases such as sigma.

The properties of UNS N06625 that make it an excellent choice for sea-water applications are freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength, and resistance to chloride-ion stress-corrosion cracking. It is used as wire rope for mooring cables, propeller blades for motor patrol gunboats, submarine auxiliary propulsion motors, submarine quick disconnect fittings, exhaust ducts for Navy utility boats, sheathing for undersea communication cables, submarine transducer controls, and steam-line bellows. Potential applications are springs, seals, bellows for submerged controls, electrical cable connectors, fasteners, flexure devices, and oceanographic instrument components.

The outstanding and versatile corrosion resistance of Alloy 625 under a wide range of temperatures and pressures is a primary reason for its wide acceptance in the chemical processing field. Because of its ease of fabrication, it is made into a variety of components for plant equipment. Its high strength enables it to be used, for example, in thinner-walled vessels or tubing than possible with other materials, thus improving heat transfer and saving weight. Some applications requiring the combination of strength and corrosion resistance offered by Inconel 625 are bubble caps, tubing, reaction vessels, distillation columns, heat exchangers, transfer piping, and valves.

Common Trade Names: Inconel® 625, Alloy 625, Nickel 625, Inconel® Alloy 625, Nickel Alloy 625.
Specifications: UNS N06625, AFNOR NC22DNB4M, WNR/DIN 2.4856, JIS NCF625, GOST ХН75МБТЮ, EURONORM NiCr22Mo9Nb, BS NA21
Applications: Aircraft ducting systems, Aerospace, Jet engine exhaust systems, Engine thrust-reverser systems, Specialized seawater equipment, Chemical process equipment
Features: High creep-rupture strength, Oxidation resistant to 1800° F, Seawater pitting and crevice corrosion resistant, Immune to chloride ion stress corrosion cracking, Non-magnetic.
Registered Trademarks: INCONEL® is a registered trademark of the Special Metals Corporation group of companies.

Siddhagiri Metals and Tubes is a renowned supplier of Inconel 625. The material conforms to International Standards and Specifications i.e. UNS N06625, AFNOR NC22DNB4M, WNR/DIN 2.4856, JIS NCF625, GOST ХН75МБТЮ, EURONORM NiCr22Mo9Nb, BS NA21. Our company is ISO 9001:2015 Certified and CRISIL MSE 4 Rated. Inconel grade is available in forms Pipe, Tubes, Flanges, Fittings, Fasteners, Bars, Sheets, Plates, Wiremesh etc. Inconel® is a registered trademark of Special Metals Corporation.

Inconel Alloy 625 Seamless Pipe

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Seamless Pipe, Alloy Seamless Pipe, Inconel 625 Seamless Pipe, Alloy 625 Seamless Pipe, Inconel Alloy 625 Seamless Pipe, Nickel Alloy 625 Seamless Pipe, Inconel Pipe, Alloy Pipe, Inconel 625 Pipe, Alloy 625 Pipe, Inconel Alloy 625 Pipe, Nickel Alloy 625 Pipe.


Inconel Alloy 625 Welded Pipe

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Welded Pipe, Alloy Welded Pipe, Inconel 625 Welded Pipe, Alloy 625 Welded Pipe, Inconel Alloy 625 Welded Pipe, Nickel Alloy 625 Welded Pipe, Inconel Pipe, Alloy Pipe, Inconel 625 Pipe, Alloy 625 Pipe, Inconel Alloy 625 Pipe, Nickel Alloy 625 Pipe.


Inconel Alloy 625 Seamless Tube

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Seamless Tube, Alloy Seamless Tube, Inconel 625 Seamless Tube, Alloy 625 Seamless Tube, Inconel Alloy 625 Seamless Tube, Nickel Alloy 625 Seamless Tube, Inconel Tube, Alloy Tube, Inconel 625 Tube, Alloy 625 Tube, Inconel Alloy 625 Tube, Nickel Alloy 625 Tube, Inconel Tubing, Alloy Tubing, Inconel 625 Tubing, Alloy 625 Tubing, Inconel Alloy 625 Tubing, Nickel Alloy 625 Tubing.


Inconel Alloy 625 Welded Tube

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Welded Tube, Alloy Welded Tube, Inconel 625 Welded Tube, Alloy 625 Welded Tube, Inconel Alloy 625 Welded Tube, Nickel Alloy 625 Welded Tube, Inconel Tube, Alloy Tube, Inconel 625 Tube, Alloy 625 Tube, Inconel Alloy 625 Tube, Nickel Alloy 625 Tube, Inconel Tubing, Alloy Tubing, Inconel 625 Tubing, Alloy 625 Tubing, Inconel Alloy 625 Tubing, Nickel Alloy 625 Tubing.


Inconel Alloy 625 Flange

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Flange, Alloy Flange, Inconel 625 Flange, Alloy 625 Flange, Inconel Alloy 625 Flange, Nickel Alloy 625 Flange, Inconel Flange, Alloy Flange, Inconel 625 Flange, Alloy 625 Flange, Inconel Alloy 625 Flange, Nickel Alloy 625 Flange. Inconel Pipe Flange, Alloy Pipe Flange, Inconel 625 Pipe Flange, Alloy 625 Pipe Flange, Inconel Pipe Flange, Alloy Pipe Flange, Inconel 625 Pipe Flange, Alloy 625 Pipe Flange, Inconel Alloy 625 Pipe Flange, Nickel Alloy 625 Pipe Flange, Inconel Alloy 625 Pipe Flange, Nickel Alloy 625 Pipe Flange.


Inconel Alloy 625 Fasteners

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Fasteners, Alloy Fasteners, Inconel 625 Fasteners, Alloy 625 Fasteners, Inconel Alloy 625 Fasteners, Nickel Alloy 625 Fasteners, Inconel Nuts, Alloy Nuts, Inconel 625 Nuts, Alloy 625 Nuts, Inconel Alloy 625 Nuts, Nickel Alloy 625 Nuts, Inconel Bolts, Alloy Bolts, Inconel 625 Bolts, Alloy 625 Bolts, Inconel Alloy 625 Bolts, Nickel Alloy 625 Bolts, Inconel Screws, Alloy Screws, Inconel 625 Screws, Alloy 625 Screws, Inconel Alloy 625 Screws, Nickel Alloy 625 Screws, Inconel Washers, Alloy Washers, Inconel 625 Washers, Alloy 625 Washers, Inconel Alloy 625 Washers, Nickel Alloy 625 Washers.


Inconel Alloy 625 Pipe Fittings

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Pipe Fittings, Alloy Pipe Fittings, Inconel 625 Pipe Fittings, Alloy 625 Pipe Fittings, Inconel Alloy 625 Pipe Fittings, Nickel Alloy 625 Pipe Fittings, Inconel Buttweld Fittings, Alloy Buttweld Fittings, Inconel 625 Buttweld Fittings, Alloy 625 Buttweld Fittings, Inconel Alloy 625 Buttweld Fittings, Nickel Alloy 625 Buttweld Fittings, Inconel Fittings, Alloy Fittings, Inconel 625 Fittings, Alloy 625 Fittings, Inconel Alloy 625 Fittings, Nickel Alloy 625 Fittings.


Inconel Alloy 625 Tube Fittings

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Tube Fittings, Alloy Tube Fittings, Inconel 625 Tube Fittings, Alloy 625 Tube Fittings, Inconel Alloy 625 Tube Fittings, Nickel Alloy 625 Tube Fittings, Inconel Compression Tube Fittings, Alloy Compression Tube Fittings, Inconel 625 Compression Tube Fittings, Alloy 625 Compression Tube Fittings, Inconel Alloy 625 Compression Tube Fittings, Nickel Alloy 625 Compression Tube Fittings, Inconel Compression Fittings, Alloy Compression Fittings, Inconel 625 Compression Fittings, Alloy 625 Compression Fittings, Inconel Alloy 625 Compression Fittings, Nickel Alloy 625 Compression Fittings.


Inconel Alloy 625 Forged Fittings

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Forged Fittings, Alloy Forged Fittings, Inconel 625 Forged Fittings, Alloy 625 Forged Fittings, Inconel Alloy 625 Forged Fittings, Nickel Alloy 625 Forged Fittings, Inconel Forging Fittings, Alloy Forging Fittings, Inconel 625 Forging Fittings, Alloy 625 Forging Fittings, Inconel Alloy 625 Forging Fittings, Nickel Alloy 625 Forging Fittings, Inconel Fittings, Alloy Fittings, Inconel 625 Fittings, Alloy 625 Fittings, Inconel Alloy 625 Fittings, Nickel Alloy 625 Fittings.


Inconel Alloy 625 Round Bar

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Round Bar, Alloy Round Bar, Inconel 625 Round Bar, Alloy 625 Round Bar, Inconel Alloy 625 Round Bar, Nickel Alloy 625 Round Bar, Inconel Bar, Alloy Bar, Inconel 625 Bar, Alloy 625 Bar, Inconel Alloy 625 Bar, Nickel Alloy 625 Bar.


Inconel Alloy 625 Sheet Plate

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Sheet Plate, Alloy Sheet Plate, Inconel 625 Sheet Plate, Alloy 625 Sheet Plate, Inconel Alloy 625 Sheet Plate, Nickel Alloy 625 Sheet Plate, Inconel Plate, Alloy Plate, Inconel 625 Plate, Alloy 625 Plate, Inconel Alloy 625 Plate, Nickel Alloy 625 Plate, Inconel Sheet, Alloy Sheet, Inconel 625 Sheet, Alloy 625 Sheet, Inconel Alloy 625 Sheet, Nickel Alloy 625 Sheet.


Inconel Alloy 625 Wire Mesh

Siddhagiri Metals and Tubes is leading supplier, manufacturer and exporter of Inconel Wire Mesh, Alloy Wire Mesh, Inconel 625 Wire Mesh, Alloy 625 Wire Mesh, Inconel Alloy 625 Wire Mesh, Nickel Alloy 625 Wire Mesh, Inconel Mesh, Alloy Mesh, Inconel 625 Mesh, Alloy 625 Mesh, Inconel Alloy 625 Mesh, Nickel Alloy 625 Mesh, Inconel Wire, Alloy Wire, Inconel 625 Wire, Alloy 625 Wire, Inconel Alloy 625 Wire, Nickel Alloy 625 Wire.


Siddhagiri Metals and Tubes has been supplying Inconel 625 since decades. This Inconel 625 grade is available in many forms. We have an experience of about 30 years in the field. We are a global exporter and have managed to maintain good relationships with more than 70 clients worldwide.
Other Names: UNS N06625, Alloy 625, Nickel 625
Category: Inconel > Inconel 625
Material: Inconel 625
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
Rating: 4.8/5 based on 90 customer reviews

Inconel 625 Specifications and Standards

Grade North America France Germany Japan Russia European Russian British Other Names
Inconel 625 UNS N06625 AFNOR NC22DNB4M WNR/DIN 2.4856 JIS NCF 625 GOST ХН75МБТЮ EURONORM NiCr22Mo9Nb OR ЭИ602 BS NA 21 Alloy 625/ Nickel 625

Properties of Inconel 625

  • Chemical Properties
    C Mn Fe S Si Cr Ni Mo Co Al P Nb+Ta Ti
    - - - - - 20.000 58.000 8.000 - - - 3.150 -
    0.100 0.500 5.000 0.015 0.500 23.000 - 10.000 1.000 0.400 0.015 4.150 0.400
  • Mechanical Properties
    Yield Strength
    0.2% Proof
    (MPa)
    Tensile strength
    (MPa)
    Elongation
    (% in 50mm)
    Hardness
    (HV)
    MIN 415 830 30.00  
    MAX       197
  • Physical Properties
    Density lb/cu in 0.305
      gram/cc 8.44
    Melting Range °F 2350
      °C 1290
    Specific Heat Btu/lb°F (J/kg°C)  
         
      0°F (-18°C) 0.096(402)
      70°F (21°) 0.098(410)
      200°F (93°C) 0.102(427)
      400°F (204°C) 0.109(456)
      600°F (316°C) 0.115(481)
      800°F (427°C) 0.122(511)
      1000°F (538°C) 0.128(536)
      1200°F (649°C) 0.135(565)
      1400°F (760°C) 0.141(590)
      1600°F (871°C) 0.148(620)
      1800°F (982°C) 0.154(645)
      2000°F (1093°C) 0.160(670)
    Permeability at 200 Oersted (15.9 kA/m) 1.0006
    Curie Temperature °F <-320
      °C -196

Forms of Inconel 625

Get In Touch

We Cherish All Your Requirements