Inconel 625 Round Bars
Siddhagiri Metals and Tubes is in the business of manufacturing and exporting Inconel 625 Roud Bars. We have a huge inventory of corrosion resistant ASTM B446 UNS N06625 Bars.
Other Names: ASTM B446 UNS N06625, Inconel Bars, Inconel 625 Bars, Inconel Round Bar, Inconel Hex Bar, Inconel Square Bar, Inconel Flat Bar, ASTM B446 Bar
Material: Inconel 625
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
ASTM B446 UNS N06625 • Inconel Round Bar • Inconel Hex Bar • Inconel Flat Bar • Inconel Bar · Inconel 625 Round Bar Exporter
Inconel 625 Round Bars of high-quality and highly corrosion-resistant are supplied and stocked by Siddhagiri Metals and Tubes. Our entire round bar inventory is available in random lengths or can be cut to specific lengths to meet your exact requirements. The ASTM B446 UNS N06625 Bars we supply includes a complete range of alloys that demonstrate high strength and high resistance to heat and corrosion in even the most extreme conditions. Our vision is to be the premier exporter & stockist of Ferrous & Non-ferrous solutions around the world, revolutionizing the supply chains of the industries we serve
Round bars are most frequently used to make parts such as gears, shafts, axles, and flywheels for rotating machinery applications. Round Bars can also be engineered and used for manufacturing of seamless pipe and tubing used in oil drilling, military, and other applications. Inconel 625 Round bars conform to ASTM, UNS, ASME, UNS, ANSI, EN standards and specifications. Round Bar is available in a wide variety of sizes ranging from 10 mm to 125 mm. Inconel Bar available in following forms Round Bar, Hex Bars, Flat Bar, Square Bar. Round bars are typically used in Engineering Construction, Residential Construction, Non-Residential Construction, Mining Infrastructure, Transport and Storage Manufacturing.
Siddhagiri Metals and Tubes offers a comprehensive range of Inconel Round Bar which is available in Alloy and Stainless Steel grades. We pride ourselves on supplying Round Bar products to suit your exact requirements. Our Round bars are finished according to, En, BS, ANSI, ASME specifications. The length of the round bar is 50 mm to 6000 mm long and it can be Single Random, Double Random and Cut Length. The characteristics of high resistance to thermal oxidation, corrosion resistance and high strength in our round bar meet the requirements for use in numerous applications within the aerospace, chemical processing, thermal processing, oil & gas, pharmaceutical and bio synthetic and motorsport industries. We supply ASTM B446 round bars with diameters between 0.5 mm to 500 mm.
Our company has been exporting Inconel 625 Round bars Globally and has attained a recognition in many countries. We have exported to countries like Europe, Australia, Japan, Indonesia, South Africa, Thailand, UAE, Qatar, etc.
- Bar Specification: ASTM B446 UNS N06625, ASME SB446 UNS N06625 & EN 2.4856
- Thickness: 50 mm to 6000 mm Long
- Type: Inconel Bar
- Form: Inconel 625 Round Bar, Inconel 625 Hex Bars, Inconel 625 Flat Bar, Inconel 625 Square Bar
- Length: Single Random, Double Random & Cut Length
- Finish: Bright and Black Finish
- Origin: Indian Origin, European Origin, Japanese Origin
- Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
- Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests
Inconel 625 Alloy Bar Sizes in Stock
|Inconel 625 Round Bar, Inconel 625 Flat Bar, Inconel 625 Hex Bar||0.5 mm to 500 mm||50 mm to 6000 mm Long||Indian, European and Japanese origin|
Forms of ASTM B446 UNS N06625 in Stock
Inconel 625 Round Bars available in 0.5 mm to 500 mm Diameter
Inconel 625 Hex Bar ASTM B446 UNS N06625
Inconel 625 Flat Bar Suppliers and Manufacturer ASTM B446 UNS N06625
C Mn Fe S Si Cr Ni Mo Co Al P Nb+Ta Ti - - - - - 20.000 58.000 8.000 - - - 3.150 - 0.100 0.500 5.000 0.015 0.500 23.000 - 10.000 1.000 0.400 0.015 4.150 0.400
(% in 50mm)
MIN 415 830 30.00 MAX 197
Density lb/cu in 0.305 gram/cc 8.44 Melting Range °F 2350 °C 1290 Specific Heat Btu/lb°F (J/kg°C) 0°F (-18°C) 0.096(402) 70°F (21°) 0.098(410) 200°F (93°C) 0.102(427) 400°F (204°C) 0.109(456) 600°F (316°C) 0.115(481) 800°F (427°C) 0.122(511) 1000°F (538°C) 0.128(536) 1200°F (649°C) 0.135(565) 1400°F (760°C) 0.141(590) 1600°F (871°C) 0.148(620) 1800°F (982°C) 0.154(645) 2000°F (1093°C) 0.160(670) Permeability at 200 Oersted (15.9 kA/m) 1.0006 Curie Temperature °F <-320 °C -196
Properties of Inconel 625 alloy
Inconel 625 Cold Forming
Inconel 625 can be cold formed by standard methods. When the material becomes too stiff from cold working, ductility can be restored by process anneal.
Inconel 625 Hot Forming
Hot working may done at 2100°F (1149°C) maximum furnace temperature. Care should be exercised to avoid frictional heat build-up which can result in overheating, exceeding 2100°F (1149°C). Inconel 625 becomes very stiff at temperatures below 1850°F (1010°C). Work pieces that fall below this temperature should be reheated. Uniform reductions are recommended to avoid the formation of a duplex grain structure. Approximately 15/20% reduction is recommended for finishing.
Inconel 625 Machining
Inconel 625 should preferably be machined in the annealed condition. Since Inconel Alloy 625 is prone to work hardening, only low cutting speeds should be used and the cutting tool should be engaged at all times. Adequate cut depth is necessary to assure avoiding contact with the previously formed work-hardened zone.
Inconel 625 Welding
Inconel 625 can be readily welded by conventional processes used for austenitic stainless steel, including fusion and resistance methods. The material should be in the mill annealed condition and thoroughly descaled and cleaned before welding. Preheating is not required and post-weld treatment is not needed to maintain or restore corrosion resistance.
Inconel 625 Heat Treatment
Hot- or cold-formed parts are usually annealed at 1700°-1900°F for times commensurate with thickness; higher temperatures may be used to soften material for additional cold work. Inconel alloy 625 is solution-treated at 2000°-2200°F. These temperatures are metal temperatures based on batch operations and may not apply to continuous annealing, which normally consists of short exposure in the hot zone of a furnace set at higher temperatures. The rate of cooling after heating has no significant effect on Inconel alloy 625.
Services We Offer
Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.
Inconel Bars are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.
PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
Packing and Delivery
The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.