Inconel 601 Welded Tubes
Siddhagiri Metals and Tubes is a supplier and manufacturer of Inconel 601 Welded pipes. We supply ASTM B516 UNS N06601 and ASTM B751 UNS N06601 in very reasonable prices. We have procreated more than 70 clients worldwide.
Other Names: ASTM B516 UNS N06601, ASTM B751 UNS N06601, Inconel Tube, Inconel Tubing
Material: Inconel 601
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
ASTM B751 UNS N06601 · ASTM B516 UNS N06601 • Inconel 601 Tube • Inconel Welded Tubes
Inconel 601 Welded Tube are characterized by tight tolerances with precise dimensional accuracy and free from oil, grease, and other particles. Siddhagiri Metals and Tubes is well known and recognized as the leading supplier in the industry. Our company is ISO 9001:2015 Certified and CRISIL MSE 4 Rated. We are a renowned supplier and exporter of ASTM B751 UNS N06601 and ASTM B516 UNS N06601 & have maintained good relationships with more than 70 International clients.
Welded tubes have varied industrial applications such as chemical, petroleum, food processing, plumbing, heat exchangers, paper making, refrigeration, water treatment, steelwork, construction, etc. Choosing the proper tubing is very important and will help eliminate future problems and to improve overall quality of liquid or gas systems. Our ASTM B516 Inconel tubes are manufactured as per stringent manufacturing specifications create smoother, cleaner capillary tubing with consistently uniform ID characteristics and close dimension controls, the proprietary process creates the ultimate inner surface smoothness in the range of 10-15 RMS.
Siddhagiri Metals and Tubes supplies a full range of Inconel Tubes in sizes ranging from 1/8" OD TO 2"OD, 3MM OD TO 38 MM OD. The thickness of the Inconel 601 welded tube ranges from 1MM TO 3 MM, 0.028 TO 0.156 IN. Most pipes are available in single random, double random and cut length sections. Our welded tubes are characterized by tight tolerances with precise dimension accuracy, smooths bright surfaces and cleaned, free from oil, grease, and other particles. This ensures an optimized flow of liquids and gases for all kinds of industrial applications.
Siddhagiri Metals and Tubes has been a renowned exporter of Inconel welded tubes in countries such as South Africa, Thailand, Australia, Japan, Russia, UAE, Saudi Arabia, Qatar, Afghanistan, Taiwan, Spain, Poland, France, Germany, Canada, etc. We are Saudi Aramco approved company for welded tubing.
- Tube Specification: ASTM B516 UNS N06601, ASTM B751 UNS N06601, ASME SB516 UNS N06601 & EN 2.4851
- Dimension Standard: ANSI B36.19, ANSI B36.10
- Outside Diameter (OD): 1/8" OD TO 2"OD 3MM OD TO 38 MM OD
- Thickness Range: 1MM TO 3 MM 0.028 TO 0.156 IN, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
- Type: Welded Tube, EFW Tube, ERW Tube
- Form: Inconel 601 Round Tube, Inconel 601Square Tube, Inconel 601Rectangular Tube
- Length: Single Random, Double Random & Cut Length
- Tubing End: Plain End, Beveled End, Threaded
- End Protection: Plastic Caps
- Delivery Condition: Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
- External Coating: 3LPE / 3LPP/ FBE/ DFBE/ PP
- Origin: Indian Origin, European Origin, Japanese Origin
- Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
- Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests
Inconel 601 Tube Sizes in Stock
|1/8" OD TO 2"OD 3MM OD TO 38 MM OD||1MM TO 3 MM 0.028 TO 0.156 IN||Inconel ERW Tubes, Inconel Welded Tubes, Inconel Fabricated Tubes, Inconel LSAW Tubes|
Forms of ASTM B516 UNS N06601 in Stock
Inconel 601 Welded Square Tubes ASTM B516
Inconel 601 Welded Round Tubes ASTM B516 in sizes 1MM TO 3 MM 0.028 to 0.156 IN
Inconel 601 Welded Rectangular Tubes ASTM B516
Ni Cr Al C Mn S Si Cu Fe MIN 58.000 21.000 1.000 - - - - - Bal MAX 63.000 25.000 1.700 0.100 1.000 0.015 0.500 1.000
(% in 50mm)
MIN 205 550 30.00 MAX 220
Density lb/in³ 0.293 Mg/m³ 8.11 Specific Heat 70°F, Btu/lb-°F 0.107 21°C, J/kg-°C 448 Melting Range °F 2480-2571 °C 1360-1411 Curie Temperature °F <-320 °C <-196 Permeability 200 oersted (15.9 kA/m) 76°F (24°C) 1.003 -109°F (-78°C) 1.004 -320°F (-196°C) 1.016
Properties of Inconel 601 alloy
Inconel 601 Cold Forming
The rate of cooling following hot-working is not critical with respect to thermal cracking. To avoid sensitization, however, the alloy should be cooled rapidly through the 1000-1400°F (540-760°C) temperature range. Inconel alloy 601 is cold-formed by conventional procedures. The alloy's work-hardening rate, is somewhat higher than the rate for Inconel alloy 600 and INCOLOY alloy 800.
Inconel 601 Hot Forming
The temperature range for hot-forming Inconel alloy 601 is 1600-2250°F (870-1230°C). Hot-working operations involving large deformations should be performed at 1900-2250°F (1040-1230°C). The alloy has low ductility at temperatures from 1200 to 1600°F (650-870°C) and should not be worked in that range. Light working at temperatures below 1200°F (650°C) can be done to develop high tensile properties.
Inconel 601 Machining
All standard machining operations are readily performed on Inconel alloy 601. For the best machinability, the alloy should be in the solution-treated condition.
Inconel 601 Welding
Inconel alloy 601 exhibits good weldability and is readily joined by conventional welding products and processes. Welding products are available which provide high joint efficiencies and heat resistance. The choice of welding product is dependent upon the service conditions to which the fabricated alloy 601 component will be exposed. Tensile properties of joints in Inconel alloy 601 are welded by the shielded-metal-arc, gas-tungsten-arc, and gas-metal-arc processes.
Inconel 601 Heat Treatment
Like other high-nickel alloys, Inconel alloy 601 must be clean before it is heated. All foreign substances such as grease, oil, paint, and shop soil must be removed from the material before a heating operation is performed. The alloy must be heated in a low-sulfur atmosphere. Fuels for open heating must be low in sulfur. To prevent excessive oxidation of the material, the furnace atmosphere should also be slightly reducing. Inconel alloy 601 is not strengthened by heat treatment. Broad ranges of strength and hardness, however, can be achieved with the alloy by the combination of cold work and annealing treatments. The amount of cold work and the section size of the material must be considered in establishing an annealing procedure.
Services We Offer
Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.
Inconel Tubes are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.
PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
Packing and Delivery
The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.