Inconel 601 Welded Pipes
Siddhagiri Metals and Tubes is a prominent supplier and distributor of Inconel 601 Welded Pipe. We are a leader in product knowledge on seamless and welded pipes. ASTM B517 UNS N06601 Pipes are available in a variety of sizes, shapes and dimensions.
Other Names: ASTM B517 UNS N06601, Inconel Pipe, Inconel Welded Pipe, Inconel Alloy Pipe, Inconel Alloy Welded Pipe, Alloy 601 Welded Pipe, Nickel 601 Welded Pipe
Material: Inconel 601
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
ASTM B517 UNS N06601 • Inconel 601 Pipe • Inconel Welded Pipe • Inconel Alloy Pipe · Alloy 601 Pipe · Inconel Alloy 601 Welded Pipe
Inconel 601 Welded Pipe with over 1300 sizes is stocked by Siddhagiri Metals and Tubes. We are a global supplier of Inconel Welded Pipes with over 30 years of experience. We carry one of the largest inventories of ASTM B517 UNS N06601 Pipe.
Welded Pipes are of two types ERW and EFW. A process for producing welded pipe is Electric Resistance Welding (ERW) also known as Contact Welding. Processing of Electric Fusion Welding, also called Continuous Welding begins as coiled steel with appropriate thickness, width and weight is made. Inconel 601 Welded Pipes are available in a wide range of sizes and properties. Due to the weld seam, lower operating pressures are stated in accordance with ASME compared to seamless pipes. In general Nickel Alloy Welded Pipe possess tighter dimensional tolerances than seamless pipes and are less costly if produced in same quantities. Inconel Welded Pipe sizes range from 1/8" to 48" inches and the thickness of the pipes are as follows: Sch 5, Sch 5s, Sch 10, Sch 10s, Sch 20, Sch 30, Sch 40s, Sch 40, Sch STD, Sch 60, Sch 80s, Sch 100, Sch 120, Sch XS, Sch XXS, Sch 160. The Inconel pipe is manufactured and finished according to dimension standards such as ANSI B36.10 and ANSI B36.19.
Siddhagiri Metals and Tubes is a leading supplier of Inconel 601 welded pipes providing an extensive selection of all grades and dimensions to the oil and gas, petrochemical, chemical and power industries. We work closely together with certified pipe manufacturers from around the world and have a huge range of different welded pipes constantly on stock ranging from Electric Resistance Welded (ERW) Pipes, Fusion Welded (EFW) Pipes to Double Submerged Arc Welded (DSAW) Pipes. We have a huge inventory of Inconel Alloy Welded pipes in different sizes and dimensions ranging from 1/8" to 16" inches in size and Sch 5, Sch 5s, Sch 10, Sch 10s, Sch 20, Sch 30, Sch 40s, Sch 40, Sch STD, Sch 60, Sch 80s, Sch 100, Sch 120, Sch XS, Sch XXS, Sch 160 in thickness. Siddhagiri Metals and Tubes is one of the major manufacturers of welded Inconel 601 pipes for applications in oil and gas, LNG, Petro-chemical, shipbuilding, desalination, water treatment and energy industries.
We are engaged in offering wide range of ASTM B517 welded pipes in Stainless Steel, Duplex Steel, Nickel Alloy, Copper and Alloy Steel material. We also specialize in supplying Inconel Welded Pipes. We have a huge stock of piping materials with applications in industries such as Medicine, Chemical, Oil and Gas etc. We have an inventory of pipes of Indian, European and Japanese origin. Our comapany has bagged an ISO 9001:2015 certification for the excellence in the quality of our products.
All our Inconel Pipes conform to international standards and are manufactured according to ASTM, ASME, DIN, ANSI, EN, WERKSTOFFE, JIS, BS standards. Each piece of pipe is fully tested by professionals according to international standards. Few of the major brands we represent are Nippon, Sumitomo, Outokumpu, Sandvik, etc. We are Saudi ARAMCO approved vendors of Inconel alloy pipes. We export in many major countries which include UAE, Saudi Arabia, Russia, Iran, Indonesia, Chile, Germany, Australia, USA, Europe, Brazil, South Africa and many more.
- Pipe Specification: ASTM B517 UNS N06601, ASME SB517 UNS N06601 & EN 2.4851
- Dimension Standard: ANSI B36.19, B36.19M ANSI B36.10
- Outside Diameter (OD): 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size pipes available Ex-stock
- Thickness Range: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
- Type: Inconel 601 Welded Pipe, Inconel 601 EFW Pipes, Inconel 601 ERW Pipes
- Form: Inconel 601 Round Pipes, Inconel 601 Square Pipes, Inconel 601 Rectangular Pipe
- Length: Single Random, Double Random & Cut Length
- End: Plain End, Beveled End, Threaded
- End Protection: Plastic CapsOutside Finish: 2B, No.1, No.4, No.8 Mirror Finish
- Delivery Condition: Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
- External Coating: 3LPE / 3LPP/ FBE/ DFBE/ PP
- Origin: Indian Origin, European Origin, Japanese Origin
- Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
- Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests
Inconel 601 Alloy Pipe Sizes in Stock
|Pipe Form||Size Range||Thickness||Dimension Standards|
|Inconel Welded Pipe, Inconel ERW Pipe, Inconel EFW Pipes||1/8" to 48" inches||SCH 5, SCH 5S, SCH 10, SCH 10S, SCH 20, SCH 30, SCH 40S, SCH 40, SCH STD, SCH 60, SCH 80S, SCH 100, SCH 120, SCH XS, SCH XXS, SCH 160||ANSI B36.10, ANSI B36.19M|
Forms of ASTM B517 UNS N06601 in Stock
ASTM B517 Square Pipes available in ASTM B517 UNS N06601 SCH 5 to XXS
Inconel 601 Round Pipes available in sizes 1/4 to 16" in ASTM B517 UNS N06601
Inconel 601 Rectangular Pipes available in astmInconel 601
Ni Cr Al C Mn S Si Cu Fe MIN 58.000 21.000 1.000 - - - - - Bal MAX 63.000 25.000 1.700 0.100 1.000 0.015 0.500 1.000
(% in 50mm)
MIN 205 550 30.00 MAX 220
Density lb/in³ 0.293 Mg/m³ 8.11 Specific Heat 70°F, Btu/lb-°F 0.107 21°C, J/kg-°C 448 Melting Range °F 2480-2571 °C 1360-1411 Curie Temperature °F <-320 °C <-196 Permeability 200 oersted (15.9 kA/m) 76°F (24°C) 1.003 -109°F (-78°C) 1.004 -320°F (-196°C) 1.016
Properties of Inconel 601 alloy
Inconel 601 Cold Forming
The rate of cooling following hot-working is not critical with respect to thermal cracking. To avoid sensitization, however, the alloy should be cooled rapidly through the 1000-1400°F (540-760°C) temperature range. Inconel alloy 601 is cold-formed by conventional procedures. The alloy's work-hardening rate, is somewhat higher than the rate for Inconel alloy 600 and INCOLOY alloy 800.
Inconel 601 Hot Forming
The temperature range for hot-forming Inconel alloy 601 is 1600-2250°F (870-1230°C). Hot-working operations involving large deformations should be performed at 1900-2250°F (1040-1230°C). The alloy has low ductility at temperatures from 1200 to 1600°F (650-870°C) and should not be worked in that range. Light working at temperatures below 1200°F (650°C) can be done to develop high tensile properties.
Inconel 601 Machining
All standard machining operations are readily performed on Inconel alloy 601. For the best machinability, the alloy should be in the solution-treated condition.
Inconel 601 Welding
Inconel alloy 601 exhibits good weldability and is readily joined by conventional welding products and processes. Welding products are available which provide high joint efficiencies and heat resistance. The choice of welding product is dependent upon the service conditions to which the fabricated alloy 601 component will be exposed. Tensile properties of joints in Inconel alloy 601 are welded by the shielded-metal-arc, gas-tungsten-arc, and gas-metal-arc processes.
Inconel 601 Heat Treatment
Like other high-nickel alloys, Inconel alloy 601 must be clean before it is heated. All foreign substances such as grease, oil, paint, and shop soil must be removed from the material before a heating operation is performed. The alloy must be heated in a low-sulfur atmosphere. Fuels for open heating must be low in sulfur. To prevent excessive oxidation of the material, the furnace atmosphere should also be slightly reducing. Inconel alloy 601 is not strengthened by heat treatment. Broad ranges of strength and hardness, however, can be achieved with the alloy by the combination of cold work and annealing treatments. The amount of cold work and the section size of the material must be considered in establishing an annealing procedure.
Services We Offer
Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.
Inconel Pipes are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.
PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
Packing and Delivery
The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.