ISO 9001:2015 Certified · CRISIL Rated · PED Certified · Trusted Global Exporter
Inconel 601 Seamless Tube and Tubing Supplier

Siddhagiri Metals and Tubes supplies the best quality Inconel 601 Seamless Tubes. All the materials conform to International standards and specifications. Our company is ISO 9001:2015 Certified. We have a large inventory of ASTM B167 UNS N06601 and ASTM B163 UNS N06601 Tubes.
Other Names: ASTM B163 UNS N06601, ASTM B167 UNS N06601, Inconel Tubes, Inconel Tubing, Inconel Seamless Tube, Inconel Alloy Tube, Inconel Alloy Seamless Tube
Material: Inconel 601 Alloy
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
Rating: 4.8/5 based on 78 customer reviews

ASTM B167 UNS N06601 · ASTM B163 UNS N06601 • Inconel 601 Tube • Inconel Seamless Tube • Inconel Tubes

Inconel 601 Seamless Tubes of high quality are manufactured and supplied by Siddhagiri Metals and tubes. We carry a wide range of high-temperature Seamless Tubing, available in a variety of sizes and specifications, to be used in several industries.

Seamless Tube is made from a solid round steel ‘billet’ which is heated and pushed or pulled over a form until the steel is shaped into a hollow tube. Billets are procured both from indigenous suppliers and from abroad. We carry a wide range of high-temperature seamless tubing, available in a variety of sizes and specifications, to be used in several industry for all kinds of high-temperature applications such as, thermocouple sheathes, burners, lance tubes, gas turbine, chemical processing, furnace equipment, jet engine combustion tubes, capillary tubes & heat exchangers.

We supply a full range of specialized Inconel seamless tubes used for high-performance gas chromatography (GC) and liquid chromatography (LC) as components for chromatography columns used for analytical and preparative processes in diverse industries. To separate in very small sample sizes for very complex mixtures, these analyzes can be highly accurate and precise. Samples can be used for all kind of materials such as; water, gases, fuels, air, foods, flavorings, pesticides, plastics, drugs, tissue extracts. Inconel 601 Seamless tubes are available in various sizes ranging from 1/8" OD TO 2"OD, 3MM OD TO 38 MM OD. The thickness of Inconel tube ranges from 1MM TO 3 MM, 0.028 TO 0.156 IN. Inconel Alloy 601 Seamless tubes are available in Indian, European and Japanese origin.

Siddhagiri Metals and Tubes has exported Inconel Tubes to many countries including Thailand, Indonesia, UAE, Japan, South Africa, Iraq, Iran, Saudi Arabia, Australia, Europe, Qatar, Malaysia, Congo, Brazil, Chile, USA, Canada, Japan, etc

  • Tube Specification: ASTM B167 UNS N06601, ASME SB167 UNS N06601 & EN 2.4851
  • Dimension Standards: ANSI B36.19, ANSI B36.10
  • Outside Diameter (OD): 1/8" OD TO 2"OD 3MM OD TO 38 MM OD
  • Thickness Range: 1MM TO 3 MM 0.028 TO 0.156 IN, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
  • Type: Seamless Tube, Tubing, Capillary Tubes
  • Form: Round Tube, Square Tube, Rectangular Tube
  • Length: Single Random, Double Random & Cut Length
  • End: Plain End, Beveled End, Threaded End
  • End Protection: Plastic Caps
  • Finish: Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
  • External Coating: 3LPE / 3LPP/ FBE/ DFBE/ PP
  • Origin: Indian Origin, European Origin, Japanese Origin
  • Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
  • Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Inconel 601 Alloy Tube Sizes in Stock

Size Thickness Type
1/8" OD TO 2"OD 3MM OD TO 38 MM OD 1MM TO 3 MM 0.028 TO 0.156 IN Inconel Seamless Tube, Inconel ERW Tube, Inconel Welded Tube, Inconel Fabricated Tube, Inconel LSAW Tubes

Forms of Inconel 601 Tubes with ASTM B167 UNS N06601 in Stock

In Stock  Inconel Seamless Square Tube Supplier

Square Tube

Inconel 601 Square Tubes ASTM B167 UNS N06601

In Stock  Inconel 601 Round Tube Supplier

Round Tube

Inconel 601 Round Tubes available in sizes 1/8" OD TO 2"OD

In Stock  Inconel 601 Rectangular Seamless Tube Supplier

Rectangular Tube

UNS N06601 Rectangular Tubes

  • Chemical Properties
  • Mechanical Properties
  • Physical Properties
  • Ni Cr Al C Mn S Si Cu Fe
    MIN 58.000 21.000 1.000 - - - - - Bal
    MAX 63.000 25.000 1.700 0.100 1.000 0.015 0.500 1.000
  • Yield Strength
    0.2% Proof
    (MPa)
    Tensile strength
    (MPa)
    Elongation
    (% in 50mm)
    Hardness
    (HB)
    MIN 205 550 30.00  
    MAX       220
  • Density lb/in³ 0.293
    Mg/m³ 8.11
    Specific Heat 70°F, Btu/lb-°F 0.107
    21°C, J/kg-°C 448
    Melting Range °F 2480-2571
    °C 1360-1411
    Curie Temperature °F <-320
    °C <-196
    Permeability 200 oersted (15.9 kA/m)  
    76°F (24°C) 1.003
      -109°F (-78°C) 1.004
      -320°F (-196°C) 1.016

Properties of Inconel 601 alloy

Inconel 601 Cold Forming

The rate of cooling following hot-working is not critical with respect to thermal cracking. To avoid sensitization, however, the alloy should be cooled rapidly through the 1000-1400°F (540-760°C) temperature range. Inconel alloy 601 is cold-formed by conventional procedures. The alloy's work-hardening rate, is somewhat higher than the rate for Inconel alloy 600 and INCOLOY alloy 800.

Inconel 601 Hot Forming

The temperature range for hot-forming Inconel alloy 601 is 1600-2250°F (870-1230°C). Hot-working operations involving large deformations should be performed at 1900-2250°F (1040-1230°C). The alloy has low ductility at temperatures from 1200 to 1600°F (650-870°C) and should not be worked in that range. Light working at temperatures below 1200°F (650°C) can be done to develop high tensile properties.

Inconel 601 Machining

All standard machining operations are readily performed on Inconel alloy 601. For the best machinability, the alloy should be in the solution-treated condition.

Inconel 601 Welding

Inconel alloy 601 exhibits good weldability and is readily joined by conventional welding products and processes. Welding products are available which provide high joint efficiencies and heat resistance. The choice of welding product is dependent upon the service conditions to which the fabricated alloy 601 component will be exposed. Tensile properties of joints in Inconel alloy 601 are welded by the shielded-metal-arc, gas-tungsten-arc, and gas-metal-arc processes.

Inconel 601 Heat Treatment

Like other high-nickel alloys, Inconel alloy 601 must be clean before it is heated. All foreign substances such as grease, oil, paint, and shop soil must be removed from the material before a heating operation is performed. The alloy must be heated in a low-sulfur atmosphere. Fuels for open heating must be low in sulfur. To prevent excessive oxidation of the material, the furnace atmosphere should also be slightly reducing. Inconel alloy 601 is not strengthened by heat treatment. Broad ranges of strength and hardness, however, can be achieved with the alloy by the combination of cold work and annealing treatments. The amount of cold work and the section size of the material must be considered in establishing an annealing procedure.

Services We Offer

Documentation

Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.

Quality Assurance

Inconel Tubes are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.

Material Testing

PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.

Packing and Delivery

The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.

Let Us Know What YOU Need

We Cherish All Your Requirements