Inconel 601 Round Bars
Siddhagiri Metals and Tubes has been supplying Inconel 601 Round Bar since a decade. We are a prominent suppliers of ASTM B166 UNS N06601 Bars with more than 60 clients worldwide. Our company is ISO 9001:2015 Certified and CRISIL MSE 4 Rated.
Other Names: ASTM B166 UNS N06601, Inconel Bars, Inconel 601 Bars, Inconel Round Bar, Inconel Hex Bar, Inconel Square Bar, Inconel Flat Bar, ASTM B166 Bar
Material: Inconel 601
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
ASTM B166 UNS N06601 • Inconel Round Bar • Inconel Hex Bar • Inconel Flat Bar • Inconel Bar
Inconel 601 Round bar is exported and supplied by Siddhagiri Metals and Tubes. Inconel Alloy 601 Round bars conform to all standards and specifications. ASTM B166 UNS N06601 Bars are available in various shapes and sizes.
Round bars are most frequently used to make parts such as gears, shafts, axles, and flywheels for rotating machinery applications. Round Bars can also be engineered and used for manufacturing of seamless pipe and tubing used in oil drilling, military, and other applications. Inconel 601 Round bars conform to ASTM, UNS, ASME, UNS, ANSI, EN standards and specifications. Round Bar is available in a wide variety of sizes ranging from 10 mm to 125 mm. Inconel Bar available in following forms Round Bar, Hex Bars, Flat Bar, Square Bar. Round bars are typically used in Engineering Construction, Residential Construction, Non-Residential Construction, Mining Infrastructure, Transport and Storage Manufacturing.
Siddhagiri Metals and Tubes offers a comprehensive range of Inconel Bar which is available in Alloy and Stainless Steel grades. We pride ourselves on supplying Round Bar products to suit your exact requirements. Our Round bars are finished according to, En, BS, ANSI, ASME specifications. The length of the round bar is 50 mm to 6000 mm long and it can be Single Random, Double Random and Cut Length. The characteristics of high resistance to thermal oxidation, corrosion resistance and high strength in our round bar meet the requirements for use in numerous applications within the aerospace, chemical processing, thermal processing, oil & gas, pharmaceutical and bio synthetic and motorsport industries. We supply ASTM B166 round bars with diameters between 0.5 mm to 500 mm.
Our company has been exporting Inconel 601 Round bars Globally and has attained a recognition in many countries. We have exported to countries like Europe, Australia, Japan, Indonesia, South Africa, Thailand, UAE, Qatar, etc.
- Bar Specification: ASTM B166 UNS N06601, ASME SB166 UNS N06601 & EN 2.4851
- Thickness: 50 mm to 6000 mm Long
- Type: Inconel Bar
- Form: Inconel 601 Round Bar, Inconel 601 Hex Bars, Inconel 601 Flat Bar, Inconel 601 Square Bar
- Length: Single Random, Double Random & Cut Length
- Finish: Bright and Black Finish
- Origin: Indian Origin, European Origin, Japanese Origin
- Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
- Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests
Inconel 601 Alloy Bar Sizes in Stock
|Inconel 601 Round Bar, Inconel 601 Flat Bar, Inconel 601 Hex Bar||0.5 mm to 500 mm||50 mm to 6000 mm Long||Indian, European and Japanese origin|
Forms of ASTM B166 UNS N06601 in Stock
Inconel 601 Round Bars available in 0.5 mm to 500 mm Diameter
Inconel 601 Hex Bar ASTM B166 UNS N06601
Inconel 601 Flat Bar Suppliers and Manufacturer ASTM B166 UNS N06601
Ni Cr Al C Mn S Si Cu Fe MIN 58.000 21.000 1.000 - - - - - Bal MAX 63.000 25.000 1.700 0.100 1.000 0.015 0.500 1.000
(% in 50mm)
MIN 205 550 30.00 MAX 220
Density lb/in³ 0.293 Mg/m³ 8.11 Specific Heat 70°F, Btu/lb-°F 0.107 21°C, J/kg-°C 448 Melting Range °F 2480-2571 °C 1360-1411 Curie Temperature °F <-320 °C <-196 Permeability 200 oersted (15.9 kA/m) 76°F (24°C) 1.003 -109°F (-78°C) 1.004 -320°F (-196°C) 1.016
Properties of Inconel 601 alloy
Inconel 601 Cold Forming
The rate of cooling following hot-working is not critical with respect to thermal cracking. To avoid sensitization, however, the alloy should be cooled rapidly through the 1000-1400°F (540-760°C) temperature range. Inconel alloy 601 is cold-formed by conventional procedures. The alloy's work-hardening rate, is somewhat higher than the rate for Inconel alloy 600 and INCOLOY alloy 800.
Inconel 601 Hot Forming
The temperature range for hot-forming Inconel alloy 601 is 1600-2250°F (870-1230°C). Hot-working operations involving large deformations should be performed at 1900-2250°F (1040-1230°C). The alloy has low ductility at temperatures from 1200 to 1600°F (650-870°C) and should not be worked in that range. Light working at temperatures below 1200°F (650°C) can be done to develop high tensile properties.
Inconel 601 Machining
All standard machining operations are readily performed on Inconel alloy 601. For the best machinability, the alloy should be in the solution-treated condition.
Inconel 601 Welding
Inconel alloy 601 exhibits good weldability and is readily joined by conventional welding products and processes. Welding products are available which provide high joint efficiencies and heat resistance. The choice of welding product is dependent upon the service conditions to which the fabricated alloy 601 component will be exposed. Tensile properties of joints in Inconel alloy 601 are welded by the shielded-metal-arc, gas-tungsten-arc, and gas-metal-arc processes.
Inconel 601 Heat Treatment
Like other high-nickel alloys, Inconel alloy 601 must be clean before it is heated. All foreign substances such as grease, oil, paint, and shop soil must be removed from the material before a heating operation is performed. The alloy must be heated in a low-sulfur atmosphere. Fuels for open heating must be low in sulfur. To prevent excessive oxidation of the material, the furnace atmosphere should also be slightly reducing. Inconel alloy 601 is not strengthened by heat treatment. Broad ranges of strength and hardness, however, can be achieved with the alloy by the combination of cold work and annealing treatments. The amount of cold work and the section size of the material must be considered in establishing an annealing procedure.
Services We Offer
Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.
Inconel Bars are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.
PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
Packing and Delivery
The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.