ISO 9001:2015 Certified · CRISIL Rated · PED Certified · Trusted Global Exporter
Inconel 600 Seamless Tube and Tubing Supplier

Siddhagiri Metals and Tubes is a CRISIL MSE 4 rated company. We supply high quality Inconel 600 Seamless Tubes. Our Seamless tubes conform to ASTM B167 UNS N06600 and ASTM B163 UNS N06600 standards and specifications.
Other Names: ASTM B167 UNS N06600, ASTM B163 UNS N06600, Inconel Tubes, Inconel Tubing, Inconel Seamless Tube, Inconel Alloy Tube, Inconel Alloy Seamless Tube
Material: Inconel 600 Alloy
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
Rating: 4.3/5 based on 90 customer reviews

ASTM B167 UNS N06600 · ASTM B163 UNS N06600 • Inconel 600 Tube • Inconel Seamless Tube • Inconel Tubes

Inconel 600 Seamless Tube is widely used in Petrochemical, Chemical, Pharmaceutical, Fertilizer, Agro Chemical, Aerospace, Desalination, Food & Beverage, Sugar, Distillery, Oil & Gas, Power Generation, Cement, Petroleum Refinery, Pulp & Paper and Man Made Fiber industries. Siddhagiri Metals and Tubes has been supplying UNS N06600 Seamless Tubes since 30 years. We have built a reputation over the years for quality service and business relationships with both existing and potential customers. We are always happy to discuss your requirements and will suggest solutions that are best matched to your needs.

Seamless Tube is made from a solid round steel ‘billet’ which is heated and pushed or pulled over a form until the steel is shaped into a hollow tube. Billets are procured both from indigenous suppliers and from abroad. We carry a wide range of high-temperature seamless tubing, available in a variety of sizes and specifications, to be used in several industry for all kinds of high-temperature applications such as, thermocouple sheathes, burners, lance tubes, gas turbine, chemical processing, furnace equipment, jet engine combustion tubes, capillary tubes & heat exchangers.

We supply a full range of specialized Inconel seamless tubes used for high-performance gas chromatography (GC) and liquid chromatography (LC) as components for chromatography columns used for analytical and preparative processes in diverse industries. To separate in very small sample sizes for very complex mixtures, these analyzes can be highly accurate and precise. Samples can be used for all kind of materials such as; water, gases, fuels, air, foods, flavorings, pesticides, plastics, drugs, tissue extracts. Inconel 600 Seamless tubes are available in various sizes ranging from 1/8" OD TO 2"OD, 3MM OD TO 38 MM OD. The thickness of Inconel tube ranges from 1MM TO 3 MM, 0.028 TO 0.156 IN. Inconel 600 Seamless tubes are available in Indian, European and Japanese origin.

Siddhagiri Metals and Tubes has exported Inconel Tubes to many countries including Thailand, Indonesia, UAE, Japan, South Africa, Iraq, Iran, Saudi Arabia, Australia, Europe, Qatar, Malaysia, Congo, Brazil, Chile, USA, Canada, Japan, etc

  • Tube Specification: ASTM B163 UNS N06600, ASTM B167 UNS N06600, ASME SB167 UNS N06600, ASME SB163 UNS N06600 & EN 2.4816
  • Dimension Standards: ANSI B36.19, ANSI B36.10
  • Outside Diameter (OD): 1/8" OD TO 2"OD 3MM OD TO 38 MM OD
  • Thickness Range: 1MM TO 3 MM 0.028 TO 0.156 IN, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
  • Type: Seamless Tube, Tubing, Capillary Tubes
  • Form: Round Tube, Square Tube, Rectangular Tube
  • Length: Single Random, Double Random & Cut Length
  • End: Plain End, Beveled End, Threaded End
  • End Protection: Plastic Caps
  • Finish: Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
  • External Coating: 3LPE / 3LPP/ FBE/ DFBE/ PP
  • Origin: Indian Origin, European Origin, Japanese Origin
  • Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
  • Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Inconel 600 Alloy Seamless Tube Sizes in Stock

Size Thickness Type
1/8" OD TO 2"OD 3MM OD TO 38 MM OD 1MM TO 3 MM 0.028 TO 0.156 IN Inconel 600 Seamless Tube, Inconel 600 ERW Tube, Inconel 600 Welded Tube, Inconel 600 Fabricated Tube, Inconel 600 LSAW Tubes

Forms of Inconel 600 Tubes with ASTM B163 UNS N06600 and ASTM B167 UNS N06600 in Stock

In Stock  Inconel Seamless Square Tube Supplier

Square Tube

Inconel 600 Square Tubes ASTM B167 UNS N06600

In Stock  Inconel 600 Round Tube Supplier

Round Tube

Inconel 600 Round Tubes available in sizes 1/8" OD TO 2"OD

In Stock  Inconel 600 Rectangular Seamless Tube Supplier

Rectangular Tube

ASTM B167 Inconel 600 Rectangular Tubes

  • Chemical Properties
  • Mechanical Properties
  • Physical Properties
  • C Mn S Fe Si Ni Cr Cu
    MIN - - - 6.000 - 72.000 14.000 -
    MAX 0.150 1.000 0.015 10.000 0.500 17.000 0.500
  • Yield Strength
    0.2% Proof
    (MPa)
    Tensile strength
    (MPa)
    Elongation
    (% in 50mm)
    Hardness
    (HRB)
    MIN 240 550 30.00  
    MAX       88
  • Density lb/in³ 0.305
    Mg/m³ 8.44
    Specific Heat Btu/lb°F (J/kg°C) 0.106
    J/kg-°C 444
    Melting Range °F 2470-2575
    °C 1354-1413
    Electrical Resistivity ohm-circ mil/ft 620
    μΩ-m 1.03
    Curie Temperature °F -192
    °C -124
    Permeability 200 oersted (15.9 kA/m) 1.01

Properties of Inconel 600 alloy

Inconel 600 Cold Forming

The alloy has low ductility at temperatures between 1200° and 1600°F (650° and 870°C) and should not be worked in that range. High tensile properties can be developed in the material by careful working at temperatures below 1200°F (650°C). Inconel alloy 600 is cold-formed by the standard processes used for steel and stainless steel.

Inconel 600 Hot Forming

The normal hot-working temperature range for Inconel alloy 600 is 1600° to 2250°F (870° to 1230°C). Heavy hot work should be done between 1900° and 2250°F (1040° and 1230°C); light work can be continued down to 1600°F (870°C).

Inconel 600 Machining

Inconel alloy 600 is slightly more machinable than Type 304 stainless steel and slightly less machinable than Type 303 free-machining stainless steel. The alloy is best handled on heavy-duty equipment using cutting tools large and heavy enough to withstand the loads and to quickly dissipate the heat generated. Tools must be sharp and have the proper geometry.

Inconel 600 Welding

Inconel alloy 600 is readily joined by conventional welding processes. Welding materials for joining alloy 600 are Inconel Welding Electrode 182 for shielded metal-arc welding, Inconel Filler Metal 82 for gas tungsten-arc and gas metal-arc welding, and Inconel Filler Metal 82 and INCOFLUX 4 Submerged Arc Flux for the submerged-arc process.Welds made with Inconel Welding Electrode 182 may have decreased ductility after extended exposure to temperatures of 1000° to 1400°F (540° to 760°).

Inconel 600 Heat Treatment

The behavior of the alloy during heating is governed by a number of interacting variables: amount of cold work, grain size, chemical composition, and dimensions of the material. Consequently, times and temperatures for heat treatment are usually experimentally determined.

Services We Offer

Documentation

Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.

Quality Assurance

Inconel 600 Seamless Tubes are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.

Material Testing

PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.

Packing and Delivery

The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.

Let Us Know What YOU Need

We Cherish All Your Requirements