Inconel 600 Seamless Pipes
Siddhagiri Metals and Tubes is a recongized exporter of Inconel 600 Seamless Pipes to more than 70 countries worldwide. We have an experience of more than 25 years in this field. UNS N06600 Seamless Pipe is mostly used to carry high-pressure gas or fluid within the Oil, Gas, Filtration, Refrigeration, Refining, Petrochemical and Offshore Industries.
Other Names: ASTM B167 UNS N06600, Inconel Pipe, Inconel Seamless Pipe, Inconel Alloy Pipe, Inconel Alloy Seamless Pipe, Inconel Alloy 600 Seamless Pipe, Alloy 600 Seamless Pipe
Material: Inconel 600
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
ASTM B167 UNS N06600 • Inconel 600 Seamless Pipe • Inconel Pipe · Alloy 600 Seamless Pipe
Inconel 600 Seamless Pipe are tightly regulated and the pipes stocked are fully tested to international standards. Siddhagiri Metals and Tubes has been a Global supplier of Inconel Seamless Pipes for more than 25 years now. We are an ISO 9001:2015 Certified company. We are specilists in the manufacturing of ASTM B167 UNS N06600.
A pipe without a seam or weld is known as Seamless Pipe. Inconel 600 Seamless Pipes can withsta1nd high mechanical stress and high pressure can work in high temperatures and corrosive environments. Inconel Seamless Pipe is formed by drawing a solid metal billet over a piercing rod to create a hollow tube. Seamless Pipe is then processed and finished as per dimension standard ANSI B36.10 and ANSI B36.19 and B36.19M in different wall thickness and sizes ranging from SCH 5S to SCH XXS. Inconel 600 Seamless Pipes have varied applications in the Oil and gas, Chemical, Pharmaceutical, Fertilizer, Agro-Chemical, Aerospace, Desalination, Food and Beverage, Sugar, Distillery, Power Generation, Cement, Petroleum Refinery, mechanical and structural, food processing, etc.
Siddhagiri Metals and Tubes supplies a full range of pipe schedules from Sch 5 thru Double Extra Heavy. Most Inconel pipes are available in 4" SCH 40, 6" SCH 40, 4" SCH 120, 6" SCH 120 in single random, double random and cut length sections. All Inconel 600 Pipes can be cut to your exact requirements. We also manufacture custom pipes for specific needs of the client, which are usually produced in 2-4 weeks.
We stock a complete range of alloy and steel pipes, to facilitate our client's needs at the most competitive prices. We also specialise in ERW and EFW types of welded pipes. With over 900 sizes, we have a huge inventory for any piping application. Our range of Inconel alloy Pipes include seamless (smls) and welded pipes in forms round, rectangle and square in size 15 NB UP TO 1200 NB and schedule SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS of Indian, European and Japenese origin.
These Inconel Pipes conform to international standards and guidelines and are manufactured as per ASTM, ASME, DIN, ANSI, WERKSTOFFE, EN, JIS, BS standards. The manufacturing of the Inconel 600 seamless pipes is tightly regulated and each piece is fully tested to international standards. We are Saudi ARAMCO approved suppliers of Inconel 600 Seamless Pipes and supply Inconel 600 alloy pipes of renowned brands like Nippon, Sumitomo, Outokumpu, Sandvik etc. We have regular exports of Seamless (smls) Pipes in Australia, Europe, Russia, UAE, Saudi Arabia, Qatar, Iran, Indonesia, Malaysia, South Africa, Congo, Brazil, Chile, USA, Canada, Japan, etc.
- Pipe Specification: ASTM B167 UNS N06600, ASME SB167 UNS N06600 & EN 2.4816
- Dimension Standard: ANSI B36.19M, ANSI B36.10
- Outside Diameter (OD): 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size pipes available Ex-stock
- Thickness Range: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
- Type: Seamless Pipe
- Form: Round Pipes, Square Pipes, Rectangular Pipe
- Length: Single Random, Double Random & Cut Length
- End: Plain End, Beveled End, Threaded
- End Protection: Plastic Caps
- Outside Finish: 2B, No.1, No.4, No.8 Mirror Finish
- Finish: Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
- External Coating: 3LPE / 3LPP/ FBE/ DFBE/ PP
- Origin: Indian Origin, European Origin, Japanese Origin
- Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
- Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests
Inconel Alloy 600 Seamless Pipe Sizes in Stock
|Pipe Form||Size Range||Thickness||Dimension Standards|
|Inconel 600 Seamless Pipe||1/8" to 16" inches||Sch 5, Sch 5s, Sch 10, Sch 10s, Sch 20, Sch 30, Sch 40s, Sch 40, Sch STD, Sch 60, Sch 80s, Sch 100, Sch 120, Sch XS, Sch XXS, Sch 160||ANSI B36.10, ANSI B36.19, ANSI B36.19M|
Forms of ASTM B167 UNS N06600 in Stock
Inconel 600 Square Pipes ASTM B167 available from SCH 5 to XXS
Inconel 600 Round Pipes ASTM B167 in sizes 1/4 to 16"
Inconel 600 Rectangular Pipes available in ANSI B36.10, ANSI B36.19, ANSI B36.19M standards
C Mn S Fe Si Ni Cr Cu MIN - - - 6.000 - 72.000 14.000 - MAX 0.150 1.000 0.015 10.000 0.500 17.000 0.500
(% in 50mm)
MIN 240 550 30.00 MAX 88
Density lb/in³ 0.305 Mg/m³ 8.44 Specific Heat Btu/lb°F (J/kg°C) 0.106 J/kg-°C 444 Melting Range °F 2470-2575 °C 1354-1413 Electrical Resistivity ohm-circ mil/ft 620 μΩ-m 1.03 Curie Temperature °F -192 °C -124 Permeability 200 oersted (15.9 kA/m) 1.01
Properties of Inconel 600 alloy
Inconel 600 Cold Forming
The alloy has low ductility at temperatures between 1200° and 1600°F (650° and 870°C) and should not be worked in that range. High tensile properties can be developed in the material by careful working at temperatures below 1200°F (650°C). Inconel alloy 600 is cold-formed by the standard processes used for steel and stainless steel.
Inconel 600 Hot Forming
The normal hot-working temperature range for Inconel alloy 600 is 1600° to 2250°F (870° to 1230°C). Heavy hot work should be done between 1900° and 2250°F (1040° and 1230°C); light work can be continued down to 1600°F (870°C).
Inconel 600 Machining
Inconel alloy 600 is slightly more machinable than Type 304 stainless steel and slightly less machinable than Type 303 free-machining stainless steel. The alloy is best handled on heavy-duty equipment using cutting tools large and heavy enough to withstand the loads and to quickly dissipate the heat generated. Tools must be sharp and have the proper geometry.
Inconel 600 Welding
Inconel alloy 600 is readily joined by conventional welding processes. Welding materials for joining alloy 600 are Inconel Welding Electrode 182 for shielded metal-arc welding, Inconel Filler Metal 82 for gas tungsten-arc and gas metal-arc welding, and Inconel Filler Metal 82 and INCOFLUX 4 Submerged Arc Flux for the submerged-arc process.Welds made with Inconel Welding Electrode 182 may have decreased ductility after extended exposure to temperatures of 1000° to 1400°F (540° to 760°).
Inconel 600 Heat Treatment
The behavior of the alloy during heating is governed by a number of interacting variables: amount of cold work, grain size, chemical composition, and dimensions of the material. Consequently, times and temperatures for heat treatment are usually experimentally determined.
Services We Offer
Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.
Inconel Alloy 600 Seamless Pipes are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.
PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
Packing and Delivery
The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.