Inconel 600 Round Bars
Siddhagiri Metals and Tubes has been supplying Inconel 600 Round Bars from decades, always with an eye on serving our customer's needs in the most cost-effective ways possible. Our company is ISO 9001:2015 Certified and CRISIL MSE 4 Rated.
Other Names: ASTM B166 UNS N0600, Inconel Bars, Inconel 600 Bars, Inconel Round Bar, Inconel Hex Bar, Inconel Square Bar, Inconel Flat Bar
Material: Inconel 600
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
ASTM B166 UNS N06600 • Inconel Round Bar • Inconel Hex Bar • Inconel Flat Bar • Inconel Bar
Inconel 600 Round Bars offer good oxidation and corrosion resistance at a very high temperature range. Siddhagiri Metals and Tubes is a supplier, manufacturer, exporter and stockist of high quality ASTM B166 UNS N06600 Round bars. As a highly respected suppliers and specialist of Inconel 600 Alloys, we supply a comprehensive range in Round Bar, catering the demands within a wide range of industries.
Round bars are most frequently used to make parts such as gears, shafts, axles, and flywheels for rotating machinery applications. Round Bars can also be engineered and used for manufacturing of seamless pipe and tubing used in oil drilling, military, and other applications. Inconel Alloy 600 Round bars conform to ASTM, UNS, ASME, UNS, ANSI, EN standards and specifications. Round Bar is available in a wide variety of sizes ranging from 10 mm to 125 mm. Inconel Bar available in following forms Round Bar, Hex Bars, Flat Bar, Square Bar. Round bars are typically used in Engineering Construction, Residential Construction, Non-Residential Construction, Mining Infrastructure, Transport and Storage Manufacturing.
Siddhagiri Metals and Tubes offers a comprehensive range of Inconel Bar which is available in Alloy and Stainless Steel grades. We pride ourselves on supplying Round Bar products to suit your exact requirements. Our Round bars are finished according to, En, BS, ANSI, ASME specifications. The length of the round bar is 50 mm to 6000 mm long and it can be Single Random, Double Random and Cut Length. The characteristics of high resistance to thermal oxidation, corrosion resistance and high strength in our round bar meet the requirements for use in numerous applications within the aerospace, chemical processing, thermal processing, oil & gas, pharmaceutical and bio synthetic and motorsport industries. We supply round bars with diameters between 0.5 mm to 500 mm.
Our company has been exporting Inconel 600 Round bars Globally and has attained a recognition in many countries. We have exported to countries like Europe, Australia, Japan, Indonesia, South Africa, Thailand, UAE, Qatar, etc.
- Bar Specification: ASTM B166 UNS N06600, ASME SB166 UNS N06600 & EN 2.4816
- Thickness: 50 mm to 6000 mm Long
- Type: Inconel Bar
- Form: Inconel 600 Round Bar, Inconel 600 Hex Bars, Inconel 600 Flat Bar, Inconel 600 Square Bar
- Length: Single Random, Double Random & Cut Length
- Finish: Bright and Black Finish
- Origin: Indian Origin, European Origin, Japanese Origin
- Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
- Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests
Inconel 600 Alloy Bar Sizes in Stock
|Inconel 600 Round Bar, Inconel 600 Flat Bar, Inconel 600 Hex Bar||0.5 mm to 500 mm||50 mm to 6000 mm Long||Indian, European and Japanese origin|
Forms of ASTM B166 UNS N06600 in Stock
Inconel 600 Round Bars available in 0.5 mm to 500 mm Diameter
Inconel 600 Hex Bar ASTM B166 UNS N06600
Inconel 600 Flat Bar Suppliers and Manufacturer ASTM B166 UNS N06600
C Mn S Fe Si Ni Cr Cu MIN - - - 6.000 - 72.000 14.000 - MAX 0.150 1.000 0.015 10.000 0.500 17.000 0.500
(% in 50mm)
MIN 240 550 30.00 MAX 88
Density lb/in³ 0.305 Mg/m³ 8.44 Specific Heat Btu/lb°F (J/kg°C) 0.106 J/kg-°C 444 Melting Range °F 2470-2575 °C 1354-1413 Electrical Resistivity ohm-circ mil/ft 620 μΩ-m 1.03 Curie Temperature °F -192 °C -124 Permeability 200 oersted (15.9 kA/m) 1.01
Properties of Inconel 600 alloy
Inconel 600 Cold Forming
The alloy has low ductility at temperatures between 1200° and 1600°F (650° and 870°C) and should not be worked in that range. High tensile properties can be developed in the material by careful working at temperatures below 1200°F (650°C). Inconel alloy 600 is cold-formed by the standard processes used for steel and stainless steel.
Inconel 600 Hot Forming
The normal hot-working temperature range for Inconel alloy 600 is 1600° to 2250°F (870° to 1230°C). Heavy hot work should be done between 1900° and 2250°F (1040° and 1230°C); light work can be continued down to 1600°F (870°C).
Inconel 600 Machining
Inconel alloy 600 is slightly more machinable than Type 304 stainless steel and slightly less machinable than Type 303 free-machining stainless steel. The alloy is best handled on heavy-duty equipment using cutting tools large and heavy enough to withstand the loads and to quickly dissipate the heat generated. Tools must be sharp and have the proper geometry.
Inconel 600 Welding
Inconel alloy 600 is readily joined by conventional welding processes. Welding materials for joining alloy 600 are Inconel Welding Electrode 182 for shielded metal-arc welding, Inconel Filler Metal 82 for gas tungsten-arc and gas metal-arc welding, and Inconel Filler Metal 82 and INCOFLUX 4 Submerged Arc Flux for the submerged-arc process.Welds made with Inconel Welding Electrode 182 may have decreased ductility after extended exposure to temperatures of 1000° to 1400°F (540° to 760°).
Inconel 600 Heat Treatment
The behavior of the alloy during heating is governed by a number of interacting variables: amount of cold work, grain size, chemical composition, and dimensions of the material. Consequently, times and temperatures for heat treatment are usually experimentally determined.
Services We Offer
Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.
Inconel Bars are manufactured and controlled according to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.
PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
Packing and Delivery
The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.