Incoloy 825 Seamless Tubes
Siddhagiri Metals and Tubes is a supplier and stockist of Incoloy 825 Seamless Tubes. ASTM B423 and ATSM B705 Tubes are available in a variety of sizes. We are one of the most trusted suppliers of Incoloy Seamless Tubes throughout the world.
Other Names: ASTM B423 UNS N08825, ASTM B163 UNS N08825, Incoloy Tubes, Incoloy Tubing, Incoloy Seamless Tube, Incoloy Alloy Tube, Incoloy Alloy Seamless Tube
Material: Incoloy 825 Alloy
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
ASTM B423 UNS N08825 · ASTM B163 UNS N08825 • Incoloy 825 Tube • Incoloy Seamless Tube • Incoloy Tubes
Incoloy 825 Seamless Tubes supplied by Siddhagiri Metals and Tubes is of high quality and corrosion resistant. We are a specialist in ASTM B423 UNS N08825 and ASTM B705 UNS N08825. The ASTM B423 and ASTM B163 Tubes, we supply includes a complete range of alloys that demonstrate high strength and high resistance to heat and corrosion in even the most extreme conditions. We have supplied to almost 70 countries worldwide.
Seamless Tube is made from a solid round steel ‘billet’ which is heated and pushed or pulled over a form until the steel is shaped into a hollow tube. Billets are procured both from indigenous suppliers and from abroad. We carry a wide range of high-temperature seamless tubing, available in a variety of sizes and specifications, to be used in several industry for all kinds of high-temperature applications such as, thermocouple sheathes, burners, lance tubes, gas turbine, chemical processing, furnace equipment, jet engine combustion tubes, capillary tubes & heat exchangers.
We supply a full range of specialized Incoloy seamless tubes used for high-performance gas chromatography (GC) and liquid chromatography (LC) as components for chromatography columns used for analytical and preparative processes in diverse industries. To separate in very small sample sizes for very complex mixtures, these analyzes can be highly accurate and precise. Samples can be used for all kind of materials such as; water, gases, fuels, air, foods, flavorings, pesticides, plastics, drugs, tissue extracts. Incoloy 825 Seamless tubes are available in various sizes ranging from 1/8" OD TO 2"OD, 3MM OD TO 38 MM OD. The thickness of Incoloy tube ranges from 1MM TO 3 MM, 0.028 TO 0.156 IN. Incoloy 825 Seamless tubes are available in Indian, European and Japanese origin.
Siddhagiri Metals and Tubes has exported Incoloy Tubes to many countries including Thailand, Indonesia, UAE, Japan, South Africa, Iraq, Iran, Saudi Arabia, Australia, Europe, Qatar, Malaysia, Congo, Brazil, Chile, USA, Canada, Japan, etc.
- Tube Specification: ASTM B423 UNS N08825, ASTM B163 UNS N08825, ASME SB423 UNS N08825, ASME SB4705 UNS N08825 & EN 2.4858
- Dimension Standards: ANSI B36.19, ANSI B36.10
- Outside Diameter (OD): 1/8" OD TO 2"OD 3MM OD TO 38 MM OD
- Thickness Range: 1MM TO 3 MM 0.028 TO 0.156 IN, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
- Type: Seamless Tube, Tubing, Capillary Tubes
- Form: Round Tube, Square Tube, Rectangular Tube
- Length: Single Random, Double Random & Cut Length
- End: Plain End, Beveled End, Threaded End
- End Protection: Plastic Caps
- Finish: Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
- External Coating: 3LPE / 3LPP/ FBE/ DFBE/ PP
- Origin: Indian Origin, European Origin, Japanese Origin
- Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
- Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests
Incoloy 825 Alloy Tube Sizes in Stock
|1/8" OD TO 2"OD 3MM OD TO 38 MM OD||1MM TO 3 MM 0.028 TO 0.156 IN||Incoloy Seamless Tube, Incoloy ERW Tube, Incoloy Welded Tube, Incoloy Fabricated Tube, Incoloy LSAW Tubes|
Forms of Incoloy 825 Tubes with ASTM B423 and ASTM B163 in Stock
Incoloy 825 Square Tubes ASTM B423 UNS N08825, ASTM B163 UNS N08825
Incoloy 825 Round Tubes available in sizes 1/8" OD TO 2"OD
ASTM B423 and ASTM B163 Rectangular Tubes
C Ti Mn Fe S Si Cr Ni Cu Mo Al MIN - 0.600 - 22.000 - - 19.500 38.000 1.500 2.500 - MAX 0.050 1.200 1.000 - 0.030 0.500 23.500 46.000 3.000 3.500 0.200
(% in 50mm)
MIN 241 586 30.00 MAX 237
Density lb/in³ 0.294 Mg/m³ 8.14 Specific Heat Btu/lb•°F 0.105 J/kg•°C 440 Melting Range °F 2500-2550 °C 1370-1400 Curie Temperature °F <-320 °C <-196 Permeability 200 oersted (15.9 kA/m) 1.005
Properties of Incoloy 825 alloy
Incoloy 825 Cold Forming
Cold-forming properties and practices are essentially the same for Incoloy alloy 825 as for Inconel alloy 600. Although work-hardening rate is somewhat less than for the common grades of austenitic stainless steels, it is still relatively high. Forming equipment should be well powered and strongly built to compensate for the increase in yield strength with plastic deformation.
Incoloy 825 Hot Forming
The hot-working range for Incoloy alloy 825 is 1600 to 2150°F (870 to 1180°C). For optimum corrosion resistance, final hot working should be done at temperatures between 1600 and 1800°F (870 and 980°C). Cooling after hot working should be air cool or faster. Heavy sections may become sensitized during cooling from the hot-working temperature, and therefore be subject to intergranular corrosion in certain media. A stabilizing anneal restores resistance to corrosion. If material is to be welded or subjected to further thermal treatment and subsequently exposed to an environment that may cause intergranular corrosion, the stabilizing anneal should be performed regardless of cooling rate from the hot-working temperature.
Incoloy 825 Machining
All standard machining operations are readily performed on Incoloy alloy 825. The alloy normally has optimum machining characteristics in the annealed temper.
Incoloy 825 Welding
Incoloy alloy 825 has good weldability by all conventional processes. For most applications, Inconel Welding Electrode 112 for shielded metal-arc welding and Inconel Filler Metal 625 for gas-shielded processes are used. For applications that require highest resistance to corrosion, Inco-weld Welding Electrode 686CPT and Inco-weld Filler Metal 686CPT are used.
Incoloy 825 Heat Treatment
Incoloy 825 is stabilise annealed at 940°C. The softest structure is obtained at 980°C. Sections heavier than sheet, strip and wire should be quenched to avoid sensitisation.
Services We Offer
Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.
Incoloy Tubes are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.
PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
Packing and Delivery
The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.