ISO 9001:2015 Certified · CRISIL Rated · PED Certified · Trusted Global Exporter
Incoloy 800 Welded Pipe Manufacturer

Siddhagiri Metals and Tubes is a renowned supplier of Incoloy 800 Welded Pipe. Over the years, we have built a good reputation due to the high quality of our ASTM B514 UNS N08800 Pipes.
Other Names: ASTM B514 UNS N08800, Incoloy Pipe, Incoloy Welded Pipe, Incoloy Alloy Pipe, Incoloy Alloy Welded Pipe
Material: Incoloy 800
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
Rating: 4.6/5 based on 90 customer reviews

ASTM B514 UNS N08800 • Incoloy 800 Pipe • Incoloy Welded Pipe • Incoloy Alloy Pipe

Incoloy 800 Welded Pipe is one of the products supplied by Siddhagiri Metals and Tubes. The materials conform to International standards and specifications. ASTM B514 UNS N08800 Pipe is available in the size range of 1/8" to 48" inches. Our company is ISO 9001:2015 Certified and CRISIL MSE 4 Rated. We know that the dynamic needs of the sectors require products which are precise and advanced, and that is why our R&D team is fully committed to developing products and manufacturing processes which set new standards in the industry.

Welded Pipes are of two types ERW and EFW. A process for producing welded pipe is Electric Resistance Welding (ERW) also known as Contact Welding. Processing of Electric Fusion Welding, also called Continuous Welding begins as coiled steel with appropriate thickness, width and weight is made. Incoloy 800 Welded Pipes are available in a wide range of sizes and properties. Due to the weld seam, lower operating pressures are stated in accordance with ASME compared to seamless pipes. In general Incoloy welded pipe possess tighter dimensional tolerances than seamless pipes and are less costly if produced in same quantities. Incoloy Welded Pipe sizes range from 1/8" to 48" inches and the thickness of the pipes are as follows: Sch 5, Sch 5s, Sch 10, Sch 10s, Sch 20, Sch 30, Sch 40s, Sch 40, Sch STD, Sch 60, Sch 80s, Sch 100, Sch 120, Sch XS, Sch XXS, Sch 160. The Incoloy pipe is manufactured and finished according to dimension standards such as ANSI B36.10 and ANSI B36.19.

Siddhagiri Metals and Tubes is a leading supplier of Incoloy 800 welded pipes providing an extensive selection of all grades and dimensions to the oil and gas, petrochemical, chemical and power industries. We work closely together with certified pipe manufacturers from around the world and have a huge range of different welded pipes constantly on stock ranging from Electric Resistance Welded (ERW) Pipes, Fusion Welded (EFW) Pipes to Double Submerged Arc Welded (DSAW) Pipes. We have a huge inventory of Incoloy Alloy Welded pipes in different sizes and dimensions ranging from 1/8" to 16" inches in size and Sch 5, Sch 5s, Sch 10, Sch 10s, Sch 20, Sch 30, Sch 40s, Sch 40, Sch STD, Sch 60, Sch 80s, Sch 100, Sch 120, Sch XS, Sch XXS, Sch 160 in thickness. Siddhagiri Metals and Tubes is one of the major manufacturers of welded Incoloy 800 pipes for applications in oil and gas, LNG, Petro-chemical, shipbuilding, desalination, water treatment and energy industries.

We are engaged in offering wide range of ASTM B514 welded pipes in Stainless Steel, Duplex Steel, Nickel Alloy, Copper and Alloy Steel material. We also specialize in supplying Incoloy Welded Pipes. We have a huge stock of piping materials with applications in industries such as Medicine, Chemical, Oil and Gas etc. We have an inventory of pipes of Indian, European and Japanese origin. Our comapany has bagged an ISO 9001:2015 certification for the excellence in the quality of our products.

All our Incoloy Pipes conform to international standards and are manufactured according to ASTM, ASME, DIN, ANSI, EN, WERKSTOFFE, JIS, BS standards. Each piece of pipe is fully tested by professionals according to international standards. Few of the major brands we represent are Nippon, Sumitomo, Outokumpu, Sandvik, etc. We are Saudi ARAMCO approved vendors of Incoloy alloy pipes. We export in many major countries which include UAE, Saudi Arabia, Russia, Iran, Indonesia, Chile, Germany, Australia, USA, Europe, Brazil, South Africa and many more.

  • Pipe Specification: ASTM B514 UNS N08800, ASME SB514 UNS N08800 & EN 1.4876
  • Dimension Standard: ANSI B36.19, B36.19M ANSI B36.10
  • Outside Diameter (OD): 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size pipes available Ex-stock
  • Thickness Range: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
  • Type: Incoloy 800 Welded Pipe, Incoloy 800 EFW Pipes, Incoloy 800 ERW Pipes
  • Form: Incoloy 800 Round Pipes, Incoloy 800 Square Pipes, Incoloy 800 Rectangular Pipe
  • Length: Single Random, Double Random & Cut Length
  • End: Plain End, Beveled End, Threaded
  • End Protection: Plastic CapsOutside Finish: 2B, No.1, No.4, No.8 Mirror Finish
  • Delivery Condition: Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
  • External Coating: 3LPE / 3LPP/ FBE/ DFBE/ PP
  • Origin: Indian Origin, European Origin, Japanese Origin
  • Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
  • Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Incoloy 800 Alloy Welded Pipe Sizes in Stock

Pipe Form Size Range Thickness Dimension Standards
Incoloy Welded Pipe, Incoloy ERW Pipe, Incoloy EFW Pipes 1/8" to 48" inches SCH 5, SCH 5S, SCH 10, SCH 10S, SCH 20, SCH 30, SCH 40S, SCH 40, SCH STD, SCH 60, SCH 80S, SCH 100, SCH 120, SCH XS, SCH XXS, SCH 160 ANSI B36.10, ANSI B36.19M

Forms of ASTM B514 UNS N08800 in Stock

In Stock Incoloy Alloy Square Pipe Manufacturer

Square Pipe

ASTM B514 Square Pipes available in ASTM B514 UNS N08800 SCH 5 to XXS

In Stock Incoloy 800 Round Welded Pipe Supplier

Round Pipe

Incoloy 800 Round Pipes available in sizes 1/4 to 16" in ASTM B514 UNS N08800

In Stock Incoloy 800 Welded Rectangular Pipe

Rectangular Pipe

Incoloy 800 Rectangular Pipes available in ASTM B514

  • Chemical Properties
  • Mechanical Properties
  • Physical Properties
  • C Ti Mn Fe S Si Cr Ni Cu Al
    MIN - 0.150 - 39.500 - 19.000 30.000 - 0.150
    MAX 0.100 0.600 1.500 0.015 1.000 23.000 35.000 0.750 0.600
  • Yield Str0.2% Proof(MPa) Tensile Str(MPa) Elong(% in 2mm) Hardness HV
    205 520 30.00 -
    - - - 182
  • Density lb/in³ 0.287
    g/cm³ 7.94
    Specific Heat (32-212°F), Btu/lb•°F 0.11
    (0-100°C), J/kg•°C 460
    Melting Range °F 2475-2525
    °C 1357-1385
    Curie Temperature °F -175
    °C -115
    Permeability 70°F (21°C) & 200 oersted (15.9 kA/m)  
    Annealed 1.014
      Hot-Rolled 1.009

Properties of Incoloy 800 alloy

Incoloy 800 Cold Forming

Cold forming of Incoloy 800 is done by procedures similar to those used for Inconel Alloy 600 and Stainless Steel. The work-hardening rate for Inconel 800, is higher than the rate for mild steel but lower than that for Type 304 stainless steel. The work-hardening rate for Incoloy 800 is essentially the same as the rate for Inconel 600.

Incoloy 800 Hot Forming

Hot forming of Incoloy 800 is done in the temperature range of 1600 to 2200°F (870 to 1200°C). Heavy forging should be done at temperatures from 1850°F to 2200°F (1010°C to 1200°C). Forming at temperatures between 1200 and 1600°F (650-870°C) can result in cracking of the workpiece. The rate of cooling following hot forming is not critical with respect to thermal cracking. However, the alloy is subject to carbide precipitation in the 1000-1400°F (540- 760°C) temperature range and should be cooled rapidly through that range to avoid sensitization.

Incoloy 800 Machining

Incoloy 800 is readily machined by standard methods. Turning operations can be performed with high metal removal rates, good tool life, and good surface finish using coated carbide tools. Good results have also been obtained with high-speed-steel tools, which are better for interrupted cutting. Coated carbide tools have shown good life at cutting speeds of 110-190 sfpm (33.5-57.9 m/min) and a feed of 0.008-0.035 ipr (0.20-0.89 mm/rev.). High speed steel tools have been shown to have good life at cutting speeds of 35- 95 sfpm (10.7-29.0 m/min) and a feed of 0.008-0.035 ipr (0.20-0.89 mm/rev.).

Incoloy 800 Welding

Incoloy 800 has good weldability by all welding processes. Material to be welded must be thoroughly clean, and the proper joint designs must be used. For shielded metal-arc welding of Alloy 800, the recommended welding product is Inco-Weld a Electrode. For gas-tungsten-arc, gas-metal-arc, and submerged-arc welding, Inconel Filler Metal 82 is recommended. Incoflux 4 Submerged Arc Flux is used with the submerged-arc process. These products may be used for most dis-similiar welding requirements with Incoloy 800 as well.

Incoloy 800 Heat Treatment

All material to be heated must be clean. Oil, paint, grease, shop soil and other foreign substances must be removed prior to the heating operation. Heating must be performed in a low-sulfur atmosphere. Open heating must be done with low-sulfur fuel, and the furnace atmosphere must be maintained in a reducing condition to prevent excessive oxidation. Because of the readiness with which chromium is oxidized into a refractory oxide by air, carbon dioxide or water vapor, alloy 800 cannot be bright annealed in the usual industrial annealing furnace. Under closely controlled conditions, the alloy can be bright annealed in dry, pure hydrogen (dew point of -73°F (-58°C) or lower, less than 0.004% by volume water, and less than 0.007% by volume air).

Services We Offer

Documentation

Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.

Quality Assurance

Incoloy Pipes are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.

Material Testing

PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.

Packing and Delivery

The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.

Let Us Know What YOU Need

We Cherish All Your Requirements