Incoloy 800 Supplier · Incoloy Alloy Stockist · UNS N08800 Distributor
Incoloy 800 Alloy developed to work in high temperatures.
Incoloy 800 is an austenitic, solid-solution alloy. Titanium nitrides, titanium carbides, and chromium carbides normally appear in the alloy’s microstructure. The nitrides are stable at all temperatures below the melting point and are therefore unaffected by heat treatment. Chromium carbides precipitate in the alloy at temperatures between 1000 and 2000°F (540 and 1095°C). Consequently, UNS N08800 alloy is similar to other austenitic alloys in that it can be rendered susceptible to intergranular corrosion (sensitized) in certain aggressive environments by exposure to temperatures of 1000 to 1400°F (540-760°C). An important property of Alloy 800 is its relative freedom from chloride stress-corrosion cracking. Extensive studies of stress-corrosion cracking of austenitic alloys in chloride solutions have shown that the tendency to crack decreases with increasing nickel content of alloy. For example, Inconel 600, with a nickel content of 76%, is considered to be immune to chloride-ion stress-corrosion cracking. Incoloy 800 (32.5% Ni) can be made to crack in severe laboratory tests, but it has such high resistance that it is commonly used to replace materials that have failed in service from stress-corrosion cracking.
Industry Names: Incoloy, Incoloy 800, UNS N08800
Specifications: UNS N08800, AFNOR Z8NC32-21, WNR/DIN 1.4876, JIS NCF 800, GOST XH32T, EURONORM X10NiCrAlTi32-20, OR ЭИ670, BS NA 15
Applications: Furnace components and Equipment, Petrochemical furnace cracker tubes, Pigtails and headers and Sheathing for electrical heating elements.
Features: High-temperature strength, Resistance to oxidation, Carburization, High-temperature corrosion
Siddhagiri Metals and Tubes is a proud supplier of Incoloy 800. We provide Incoloy Alloy 800 in forms - Seamless Pipe ASTM B407, Welded Pipe ASTM B514, Seamless Tube ASTM B407, Welded Tube ASTM B515, Flange ASTM B564, Fasteners, Pipe Fittings ASTM B366, Tube Fittings, Forged Fittings ASTM B564, Round Bar ASTM B408, Sheet Plate ASTM B409 and Wire Mesh. Inconel® is a registered trademark of Special Metals Corporation.
Siddhagiri metals and tubes is a Global supplier of Incoloy 800. We export UNS N08810 Internationally and have procreated more than 70 clients worldwide.
Other Names: UNS N08800, Incoloy, Alloy 800
Category: Incoloy > Incoloy 800
Material: Incoloy 800
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
Incoloy 800 Specifications and Standards
|Grade||North America||France||Germany||Japan||Russia||European||Russian||British||Other Names|
|Inconel 800||UNS N08800||AFNOR Z8NC32-21||WNR/DIN 1.4876||JIS NCF 800||GOST XH32T||EURONORM X10NiCrAlTi32-20||OR ЭИ670||BS NA 15||Incoloy 800/ Alloy 800|
Properties of Incoloy 800
C Ti Mn Fe S Si Cr Ni Cu Al MIN - 0.150 - 39.500 - 19.000 30.000 - 0.150 MAX 0.100 0.600 1.500 0.015 1.000 23.000 35.000 0.750 0.600
Yield Str0.2% Proof(MPa) Tensile Str(MPa) Elong(% in 2mm) Hardness HV 205 520 30.00 - - - - 182
Density lb/in³ 0.287 g/cm³ 7.94 Specific Heat (32-212°F), Btu/lb•°F 0.11 (0-100°C), J/kg•°C 460 Melting Range °F 2475-2525 °C 1357-1385 Curie Temperature °F -175 °C -115 Permeability 70°F (21°C) & 200 oersted (15.9 kA/m) Annealed 1.014 Hot-Rolled 1.009