ISO 9001:2015 Certified · CRISIL Rated · PED Certified · Trusted Global Exporter
Incoloy 800 Seamless Tube and Tubing Supplier

Siddhagiri Metals and Tubes stocks Incoloy 800 Seamless Tubes in huge quantities. We have an experience of more than 25 years in supplying ASTM B407 and ASTM B163 Tubes.
Other Names: ASTM B407 UNS N08800, ASTM B163 UNS N08800, Incoloy Tubes, Incoloy Tubing, Incoloy Seamless Tube, Incoloy Alloy Tube, Incoloy Alloy Seamless Tube
Material: Incoloy 800 Alloy
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
Rating: 4.2/5 based on 75 customer reviews

ASTM B407 · ASTM B163 • Incoloy 800 Tube • Incoloy Seamless Tube • Incoloy Tubes

Incoloy 800 Seamless Tube is one of the products supplied by Siddhagiri Metals and Tubes. The materials conform to International standards and specifications. ASTM B407 UNS N08800 and ASTM B163 UNS N08800 Tube is available in the size ranging form 1/8" OD TO 2"OD, 3MM OD TO 38 MM OD. Our company is ISO 9001:2015 Certified and CRISIL MSE 4 Rated. We know that the dynamic needs of the sectors require products which are precise and advanced, and that is why our R&D team is fully committed to developing products and manufacturing processes which set new standards in the industry.

Seamless Tube is made from a solid round steel ‘billet’ which is heated and pushed or pulled over a form until the steel is shaped into a hollow tube. Billets are procured both from indigenous suppliers and from abroad. We carry a wide range of high-temperature Seamless tubing, available in a variety of sizes and specifications, to be used in several industry for all kinds of high-temperature applications such as, thermocouple sheathes, burners, lance tubes, gas turbine, chemical processing, furnace equipment, jet engine combustion tubes, capillary tubes & heat exchangers.

We supply a full range of specialized Incoloy seamless tubes used for high-performance gas chromatography (GC) and liquid chromatography (LC) as components for chromatography columns used for analytical and preparative processes in diverse industries. To separate in very small sample sizes for very complex mixtures, these analyzes can be highly accurate and precise. Samples can be used for all kind of materials such as; water, gases, fuels, air, foods, flavorings, pesticides, plastics, drugs, tissue extracts. Incoloy 800 Seamless tubes are available in various sizes ranging from 1/8" OD TO 2"OD, 3MM OD TO 38 MM OD. The thickness of Incoloy tube ranges from 1MM TO 3 MM, 0.028 TO 0.156 IN. Incoloy 800 Seamless tubes are available in Indian, European and Japanese origin.

Siddhagiri Metals and Tubes has exported Incoloy Tubes to many countries including Thailand, Indonesia, UAE, Japan, South Africa, Iraq, Iran, Saudi Arabia, Australia, Europe, Qatar, Malaysia, Congo, Brazil, Chile, USA, Canada, Japan, etc

  • Tube Specification: ASTM B407 UNS N08800, ASTM B163 UNS N08800, ASME SB407 UNS N08800, ASME SB163 N08800 & EN 1.4876
  • Dimension Standards: ANSI B36.19, ANSI B36.10
  • Outside Diameter (OD): 1/8" OD TO 2"OD 3MM OD TO 38 MM OD
  • Thickness Range: 1MM TO 3 MM 0.028 TO 0.156 IN, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
  • Type: Seamless Tube, Tubing, Capillary Tubes
  • Form: Round Tube, Square Tube, Rectangular Tube
  • Length: Single Random, Double Random & Cut Length
  • End: Plain End, Beveled End, Threaded End
  • End Protection: Plastic Caps
  • Finish: Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
  • External Coating: 3LPE / 3LPP/ FBE/ DFBE/ PP
  • Origin: Indian Origin, European Origin, Japanese Origin
  • Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
  • Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Incoloy 800 Alloy Tube Sizes in Stock

Size Thickness Type
1/8" OD TO 2"OD 3MM OD TO 38 MM OD 1MM TO 3 MM 0.028 TO 0.156 IN Incoloy Seamless Tube, Incoloy ERW Tube, Incoloy Welded Tube, Incoloy Fabricated Tube, Incoloy LSAW Tubes

Forms of Incoloy 800 Tubes with ASTM B407 UNS N08800, ASTM B163 UNS N08800 in Stock

In Stock  Incoloy Seamless Square Tube Supplier

Square Tube

Incoloy 800 Square Tubes ASTM B407 UNS N08800, ASTM B163 UNS N08800

In Stock  Incoloy 800 Round Tube Supplier

Round Tube

Incoloy 800 Round Tubes available in sizes 1/8" OD TO 2"OD

In Stock  Incoloy 800 Rectangular Seamless Tube Supplier

Rectangular Tube

ASTM B407 and ASTM B163 Rectangular Tubes

  • Chemical Properties
  • Mechanical Properties
  • Physical Properties
  • C Ti Mn Fe S Si Cr Ni Cu Al
    MIN - 0.150 - 39.500 - 19.000 30.000 - 0.150
    MAX 0.100 0.600 1.500 0.015 1.000 23.000 35.000 0.750 0.600
  • Yield Str0.2% Proof(MPa) Tensile Str(MPa) Elong(% in 2mm) Hardness HV
    205 520 30.00 -
    - - - 182
  • Density lb/in³ 0.287
    g/cm³ 7.94
    Specific Heat (32-212°F), Btu/lb•°F 0.11
    (0-100°C), J/kg•°C 460
    Melting Range °F 2475-2525
    °C 1357-1385
    Curie Temperature °F -175
    °C -115
    Permeability 70°F (21°C) & 200 oersted (15.9 kA/m)  
    Annealed 1.014
      Hot-Rolled 1.009

Properties of Incoloy 800 alloy

Incoloy 800 Cold Forming

Cold forming of Incoloy 800 is done by procedures similar to those used for Inconel Alloy 600 and Stainless Steel. The work-hardening rate for Inconel 800, is higher than the rate for mild steel but lower than that for Type 304 stainless steel. The work-hardening rate for Incoloy 800 is essentially the same as the rate for Inconel 600.

Incoloy 800 Hot Forming

Hot forming of Incoloy 800 is done in the temperature range of 1600 to 2200°F (870 to 1200°C). Heavy forging should be done at temperatures from 1850°F to 2200°F (1010°C to 1200°C). Forming at temperatures between 1200 and 1600°F (650-870°C) can result in cracking of the workpiece. The rate of cooling following hot forming is not critical with respect to thermal cracking. However, the alloy is subject to carbide precipitation in the 1000-1400°F (540- 760°C) temperature range and should be cooled rapidly through that range to avoid sensitization.

Incoloy 800 Machining

Incoloy 800 is readily machined by standard methods. Turning operations can be performed with high metal removal rates, good tool life, and good surface finish using coated carbide tools. Good results have also been obtained with high-speed-steel tools, which are better for interrupted cutting. Coated carbide tools have shown good life at cutting speeds of 110-190 sfpm (33.5-57.9 m/min) and a feed of 0.008-0.035 ipr (0.20-0.89 mm/rev.). High speed steel tools have been shown to have good life at cutting speeds of 35- 95 sfpm (10.7-29.0 m/min) and a feed of 0.008-0.035 ipr (0.20-0.89 mm/rev.).

Incoloy 800 Welding

Incoloy 800 has good weldability by all welding processes. Material to be welded must be thoroughly clean, and the proper joint designs must be used. For shielded metal-arc welding of Alloy 800, the recommended welding product is Inco-Weld a Electrode. For gas-tungsten-arc, gas-metal-arc, and submerged-arc welding, Inconel Filler Metal 82 is recommended. Incoflux 4 Submerged Arc Flux is used with the submerged-arc process. These products may be used for most dis-similiar welding requirements with Incoloy 800 as well.

Incoloy 800 Heat Treatment

All material to be heated must be clean. Oil, paint, grease, shop soil and other foreign substances must be removed prior to the heating operation. Heating must be performed in a low-sulfur atmosphere. Open heating must be done with low-sulfur fuel, and the furnace atmosphere must be maintained in a reducing condition to prevent excessive oxidation. Because of the readiness with which chromium is oxidized into a refractory oxide by air, carbon dioxide or water vapor, alloy 800 cannot be bright annealed in the usual industrial annealing furnace. Under closely controlled conditions, the alloy can be bright annealed in dry, pure hydrogen (dew point of -73°F (-58°C) or lower, less than 0.004% by volume water, and less than 0.007% by volume air).

Services We Offer

Documentation

Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.

Quality Assurance

Incoloy Tubes are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.

Material Testing

PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.

Packing and Delivery

The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.

Let Us Know What YOU Need

We Cherish All Your Requirements