Incoloy 800 Seamless Pipes
Siddhagiri Metals and Tubes is a prominent supplier and stockist of Incoloy 800 Seamless Pipes. We have exported to more than 70 countries worldwide.
Other Names: ASTM B407 UNS N08800, Incoloy Pipe, Incoloy Seamless Pipe, Incoloy Alloy Pipe, Incoloy Alloy Seamless Pipe, ASTM B407
Material: Incoloy 800
Brand: Siddhagiri Metals and Tubes
Manufacturer: Siddhagiri Metals and Tubes
ASTM B407 UNS N08800 • Incoloy 800 Seamless Pipe • Incoloy Pipe · Alloy 800 Pipe
Incoloy 800 Seamless Pipe is one of the products supplied by Siddhagiri Metals and Tubes. The materials conform to International standards and specifications. ASTM B407 UNS N08800 Pipe is available in the size range of 1/8" to 16" inches. Our company is ISO 9001:2015 Certified and CRISIL MSE 4 Rated. We know that the dynamic needs of the sectors require products which are precise and advanced, and that is why our R&D team is fully committed to developing products and manufacturing processes which set new standards in the industry.
A pipe without a seam or weld is known as Seamless Pipe. Incoloy 800 Seamless Pipes can withstand high mechanical stress and high pressure can work in high temperatures and corrosive environments. Incoloy Seamless Pipe is formed by drawing a solid metal billet over a piercing rod to create a hollow tube. Seamless Pipe is then processed and finished as per dimension standard ANSI B36.10 and ANSI B36.19 and B36.19M in different wall thickness and sizes ranging from SCH 5S to SCH XXS. Incoloy 800 Seamless Pipes have varied applications in the Oil and gas, Chemical, Pharmaceutical, Fertilizer, Agro-Chemical, Aerospace, Desalination, Food and Beverage, Sugar, Distillery, Power Generation, Cement, Petroleum Refinery, mechanical and structural, food processing, etc.
Siddhagiri Metals and Tubes supplies a full range of ASTM B407 pipe schedules from Sch 5 thru Double Extra Heavy. Most Incoloy pipes are available in 4" SCH 40, 6" SCH 40, 4" SCH 120, 6" SCH 120 in single random, double random and cut length sections. All Incoloy 800 Pipes can be cut to your exact requirements. We also manufacture custom pipes for specific needs of the client, which are usually produced in 2-4 weeks.
We stock a complete range of alloy and steel pipes, to facilitate our client's needs at the most competitive prices. We also specialise in ERW and EFW types of welded pipes. With over 900 sizes, we have a huge inventory for any piping application. Our range of Incoloy Pipes include seamless (smls) and welded pipes in forms round, rectangle and square in size 15 NB UP TO 1200 NB and schedule SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS of Indian, European and Japenese origin.
These Incoloy Pipes conform to international standards and guidelines and are manufactured as per ASTM, ASME, DIN, ANSI, WERKSTOFFE, EN, JIS, BS standards. The manufacturing of the Incoloy 800 seamless pipes is tightly regulated and each piece is fully tested to international standards. We are Saudi ARAMCO approved suppliers of Incoloy 800 Seamless Pipes and supply Incoloy 800 pipes of renowned brands like Nippon, Sumitomo, Outokumpu, Sandvik etc. We have regular exports of Seamless (smls) Pipes in Australia, Europe, Russia, UAE, Saudi Arabia, Qatar, Iran, Indonesia, Malaysia, South Africa, Congo, Brazil, Chile, USA, Canada, Japan, etc.
- Pipe Specification: ASTM B407 UNS N08800, ASME SB407 UNS N08800 & EN 1.4876
- Dimension Standard: ANSI B36.19M, ANSI B36.10
- Outside Diameter (OD): 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size pipes available Ex-stock
- Thickness Range: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
- Type: Seamless Pipes
- Form: Round Pipes, Square Pipes, Rectangular Pipe
- Length: Single Random, Double Random & Cut Length
- End: Plain End, Beveled End, Threaded
- End Protection: Plastic Caps
- Outside Finish: 2B, No.1, No.4, No.8 Mirror Finish
- Finish: Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
- External Coating: 3LPE / 3LPP/ FBE/ DFBE/ PP
- Origin: Indian Origin, European Origin, Japanese Origin
- Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
- Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests
Incoloy 800 Seamless Pipe Sizes in Stock
|Pipe Form||Size Range||Thickness||Dimension Standards|
|Incoloy 800 Seamless Pipe||1/8" to 16" inches||Sch 5, Sch 5s, Sch 10, Sch 10s, Sch 20, Sch 30, Sch 40s, Sch 40, Sch STD, Sch 60, Sch 80s, Sch 100, Sch 120, Sch XS, Sch XXS, Sch 160||ANSI B36.10, ANSI B36.19, ANSI B36.19M|
Forms of ASTM B407 UNS N08800 in Stock
Incoloy 800 Square Pipes ASTM B407 available from SCH 5 to XXS
Incoloy 800 Round Pipes ASTM B407 in sizes 1/4 to 16"
Incoloy 800 Rectangular Pipes available in ANSI B36.10, ANSI B36.19, ANSI B36.19M standards
C Ti Mn Fe S Si Cr Ni Cu Al MIN - 0.150 - 39.500 - 19.000 30.000 - 0.150 MAX 0.100 0.600 1.500 0.015 1.000 23.000 35.000 0.750 0.600
Yield Str0.2% Proof(MPa) Tensile Str(MPa) Elong(% in 2mm) Hardness HV 205 520 30.00 - - - - 182
Density lb/in³ 0.287 g/cm³ 7.94 Specific Heat (32-212°F), Btu/lb•°F 0.11 (0-100°C), J/kg•°C 460 Melting Range °F 2475-2525 °C 1357-1385 Curie Temperature °F -175 °C -115 Permeability 70°F (21°C) & 200 oersted (15.9 kA/m) Annealed 1.014 Hot-Rolled 1.009
Properties of Incoloy 800 alloy
Incoloy 800 Cold Forming
Cold forming of Incoloy 800 is done by procedures similar to those used for Inconel Alloy 600 and Stainless Steel. The work-hardening rate for Inconel 800, is higher than the rate for mild steel but lower than that for Type 304 stainless steel. The work-hardening rate for Incoloy 800 is essentially the same as the rate for Inconel 600.
Incoloy 800 Hot Forming
Hot forming of Incoloy 800 is done in the temperature range of 1600 to 2200°F (870 to 1200°C). Heavy forging should be done at temperatures from 1850°F to 2200°F (1010°C to 1200°C). Forming at temperatures between 1200 and 1600°F (650-870°C) can result in cracking of the workpiece. The rate of cooling following hot forming is not critical with respect to thermal cracking. However, the alloy is subject to carbide precipitation in the 1000-1400°F (540- 760°C) temperature range and should be cooled rapidly through that range to avoid sensitization.
Incoloy 800 Machining
Incoloy 800 is readily machined by standard methods. Turning operations can be performed with high metal removal rates, good tool life, and good surface finish using coated carbide tools. Good results have also been obtained with high-speed-steel tools, which are better for interrupted cutting. Coated carbide tools have shown good life at cutting speeds of 110-190 sfpm (33.5-57.9 m/min) and a feed of 0.008-0.035 ipr (0.20-0.89 mm/rev.). High speed steel tools have been shown to have good life at cutting speeds of 35- 95 sfpm (10.7-29.0 m/min) and a feed of 0.008-0.035 ipr (0.20-0.89 mm/rev.).
Incoloy 800 Welding
Incoloy 800 has good weldability by all welding processes. Material to be welded must be thoroughly clean, and the proper joint designs must be used. For shielded metal-arc welding of Alloy 800, the recommended welding product is Inco-Weld a Electrode. For gas-tungsten-arc, gas-metal-arc, and submerged-arc welding, Inconel Filler Metal 82 is recommended. Incoflux 4 Submerged Arc Flux is used with the submerged-arc process. These products may be used for most dis-similiar welding requirements with Incoloy 800 as well.
Incoloy 800 Heat Treatment
All material to be heated must be clean. Oil, paint, grease, shop soil and other foreign substances must be removed prior to the heating operation. Heating must be performed in a low-sulfur atmosphere. Open heating must be done with low-sulfur fuel, and the furnace atmosphere must be maintained in a reducing condition to prevent excessive oxidation. Because of the readiness with which chromium is oxidized into a refractory oxide by air, carbon dioxide or water vapor, alloy 800 cannot be bright annealed in the usual industrial annealing furnace. Under closely controlled conditions, the alloy can be bright annealed in dry, pure hydrogen (dew point of -73°F (-58°C) or lower, less than 0.004% by volume water, and less than 0.007% by volume air).
Services We Offer
Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.
Incoloy Pipes are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.
PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
Packing and Delivery
The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.