ASTM B127 Sheet Plate | Monel 400 Sheet Plate Supplier
ASTM B127 specifies Sheet Plate and Strips of rolled nickel-copper alloy which is also known as Monel 400 alloy.
ASTM B127 Sheet Plate
ASTM B127specification covers Monel 400 Sheet, Plate and Strip. Monel Alloy 400 is a binary alloy of the same proportions of nickel and copper, found naturally in the nickel ore from the Sudbury (Ontario) mines and is therefore considered a puritan alloy. Monel 400 Alloy can be hardened by cold processing and prevents attacks in the variety of conditions. Good resistance to corrosion by acids and oxygen makes Monel 400 a good material for the chemical industry. Monel Alloy shall conform to the required chemical composition for nickel, copper, iron, manganese, carbon, silicon, and sulfur. Monel Alloy 400 shall conform to the required mechanical propeties such as tensile strength, yield strength, elongation, and Rockwell hardness. Monel 400 Alloy shall conform to the required grain size.
Monel 400 Sheet Plate
Monel 400 Sheet Plate is a nickel-chromium alloy bar that contains supplemental amounts of columbium, iron, molybdenum, aluminum, and titanium. Monel 400 Sheet Plate have high strength properties, heat treatable, good corrosion resistance, formability and weldability. Monel 400 Sheet Plate is commonly used for valves, fasteners, tubing materials and mandrels. Monel 400 Sheet Plate has excellent cryogenic and heat ranges. Common uses of Monel Alloy 400 include deployment in gas turbines, subservice safety valves, aircraft engines, thrust reversers, and industrial fasteners.
ASTM B127 UNS N04400
ASTM B127 covers precipitation hardening bolting material (UNS N04400) and bolting components for high temperature service. Monel 400, AMS 5596 AMS 5662 ASTM B127, UNS N04400 High Temperature (UNS N04400), Ni 52.5, Cr 19.0 Fe 18.5 Mo 3.0 Nb+Ta 3.6
Scope And Manufacturing
ASTM B127 defines Monel 400 Alloy Sheet and Monel 400 Alloy Plate. Monel Sheets and Plates are made through rolling process. Rolling mill consists of rolls, bearings to support the rolls, gear box, motor, speed control devices, hydraulic systems etc. The basic type of rolling mill is two high rolling mill. In this mill, two opposing rolls are used. The direction of rotation of the rolls can be changed in case of reversing mills, so that the work can be fed into the rolls from either direction. Such mills increase the productivity. Non reversing mills have rolls rotating in same direction. Therefore, the work piece cannot be fed from the other side. Typical roll diameters may be 1.4 m. A three high rolling mill has three rolls. First rolling in one direction takes place along one direction. Next the work is reversed in direction and fed through the next pair of roll. This improves the productivity. Dimensions such as plate, sheet, and strip thickness, width, or diameter, length, straightness, edges, squareness, and flatness shall be determined.
Siddhagiri Metals and Tubes offers Monel 400 in sheet and plate form, which have high strength and excellent corrosion resistance in acidic and alkaline environments. Monel 400 Sheet Plate is suitable for reducing conditions. Monel Sheet Plate also has good ductility and thermal conductivity. Siddhagiri Metals and Tubes supplies high quality Monel 400 Sheet and Monel 400 Plate with ASTM B127 UNS N04400 in all forms and sizes at modest price and fast delivery.
ASTM B127 specifies Strip, Plate and Sheet of Monel 400 Alloy. Siddhagiri Metals and Tubes is a reknowned supplier of Monel 400 Sheet and Plate with ASTM B127 and UNS N04400.
Other Names : ASTM B127 UNS N04400, Monel Sheet, Monel Plate, Monel Alloy Sheet, Monel Alloy Plate, Monel 400 Sheet, Monel 400 Plate, Monel Sheet Plate, Monel 400 Sheet Plate, Monel Alloy Sheet Plate.
Material : Monel 400 Alloy
Brand : Siddhagiri Metals and Tubes
Manufacturer : Siddhagiri Metals and Tubes